Mighty Mouse Solutions

Quickly replace your Gen 5 pressure release filter with this 'Stealth' Breather!-comes with support foam and check disc (remove check disc for RACE can use)This is for our standard size 3" cans breather lid only at this time (DOES NOT FIT 3.5" XL OR...

NEW Mopar cylinder head bracket does not fit cars with EGR *SRT Engine bracket may require trimming of the beauty cover* *New style SRT LOGO bracket does not fit older 6.1 intake manifolds with forward throttle body.* PCV can set up with -AN or...

Plastic printed ships blank in black textured surface. mount your own buttons easily with drill or dremel.Billet ships blank in gloss black anodizecustom holes or logos by request, may be additionalMade in the USA!-A MightymouseSolutions Exclusive!

LT4 PCV 'plug' fitting stops function of this port completely, and is replaced by new oil cap adapter for significantly more flow than stock. PCV can set up with -10,12AN inlet from driver valve cover using included adapter for 1000,1200hp capacity, and super check...

HEX TOP allows a hose attachment to direct this venting for more control and safety.NOW SHIPPING ALL NEW CYCLONE Center!The STANDARD SIZE can is 3" around and 7.5" tall and the XL is 3.5". The RACE can is an open vent catching whatever liquids...

PCV can set up with -6AN or OEM quick connect fittings -connects between valley plate and intake manifold -includes mounting kit, required push lock hoses and fittings NEW 600 Mild Option with boost check! -shock tower and water pump mounts do not direct fit with sound...

NEW AND IMPROVED This is for connecting afermarket fans directly to a GM or OEM LT1 (found on 93-97 f-bodies) This harness is built and fused for 30A. Use at your own risk. -A MightymouseSolutions Exclusive!

*Now includes GEN 6 Drain parts standard!* This is our STANDARD / TALL ONLY can which is 3" around vs 3.5" XL. Comes with fittings installed but no separate hose / ends. Universal Overflow tank Reversible top/bottom all o-ringed threads. This can has a single port...

This is a 1/8 aluminum bracket that bolts directly onto your car with no modifying and has mounting for all popular methanol pumps.This does not come with a clamp for catch can mounting.Made in the USA! Price severely slashed as this was blatantly copied...

This kit replaces the factory pcv valve stopping airflow (and oil) into the floor of the supercharger on Gen V LT4/5 DI engines. LT4 PCV 'ported' fitting re-routes the crankcase flow to the outside of the engine, so that it can be used for...

Use to block off your connections during maintenance!-Include o-rings for the male ORB version-'male' is 1 flare and 1 ORB version-'female' is 1 female flare version Green printed PLA for comfort, cost, and light duty.Use these to service and install your catch can scratch...

The can assembly and the can fittings tools are sold as a PAIR, because the side fittings are required to be loosened before the lid can be loosened. -A Mightymouse Solutions Exclusive! Green printed PLA for comfort, cost, and light duty. Use these to service...

We have removed our L bracket and lowered the price. Most regulators come with their own if needed. These Brackets Mount to the two bolts on your F-body or any 3.5-4" brake booster bolt spacing. Fuel Pressure Regulator, Wilwood Proportioning valve, or both combo! Made...

Shim a little or a lot! 1/4" max for stock studs.Set of 4Made in the USA!

NEW 800 Mild option! This kit replaces the factory pcv valve stopping airflow (and oil) into the floor of the supercharger on Gen V LT4 DI engines (2015+ Z06 and Cts-V) LT4/5 PCV 'ported' fitting re-routes the crankcase flow to the outside of the engine,...