2013 Chevrolet Corvette ZR1 Performance Parts

Includes: -Xtreme CFM 4.5 inch Intake -Daro Racing Griptec Supercharger Pulley Kit -Heavy Duty Supercharger Belt -Solid Isolator -Injector Dynamics ID1050xds Injectors -Mighty Mouse Solutions PCV System -160 Degree Thermostat -NGK Spark Plugs -Taylor Spark Plug Wires -Lingenfelter Supercharger Snout -American Racing Headers 2"...

Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured,...

Product Details: The Kong ZR1 Ram Air Intake System was designed to maximize available airflow to the inlet side of the supercharger like never before. Our new Ram Air design allows for even more airflow while maintaining additional hood clearance and a smooth MAF...

 KONG LS9 TVS 2650 PLEASE READ ALL DETAILS BELOW BEFORE PLACING AN ORDER, THANK YOU! Kong Performance is proud to introduce the Kong LS9 TVS2650 Supercharger. The Kong LS9 2650 has the same height as the factory supercharger which means this unit fits under the...

Kong LSA / LS9 Low Vacuum Bypass Valve This low vacuum bypass is a direct replacement for the LSA / LS9 OEM bypass. It is designed to open and function properly on low vacuum engines. Stage 3/4 camshafts in LSA/LS9 engines do not pull...

Kong 112mm LSX Throttle Body (Black Anodized) 126x70mm Bolt pattern. Direct bolt on to Kong LSA/LS9 TVS2650.

Kong 112mm LSX Throttle Body (Raw Finish) 126x70mm Bolt pattern. Direct bolt on to Kong LSA/LS9 TVS2650.

Kong 120mm LSX Throttle Body (Raw Finish) 126x70mm Bolt pattern. Direct bolt on to Kong LSA/LS9 TVS2650. ***Requires KONG CNC Porting on LSA/LS9 2650 for proper fitment.

Kong 120mm LSX Throttle Body (Raw Finish) 126x70mm Bolt pattern. Direct bolt on to Kong LSA/LS9 TVS2650. ***Requires KONG CNC Porting on LSA/LS9 2650 for proper fitment.

Although the Supercharged LS9 engine on the C6ZR1 has an 11 rib belt driving the supercharger, in many cases it is not enough to prevent belt slip. Smaller than stock pulleys, combined with inadequate belt wrap from the factory is a recipe for belt...

The Kong Performance Gen 3 Dual Brick Billet Lid is the latest and greatest intercooled lid option on the market for the OEM LSA 1900, KONG LSA 2650, OEM LS9 2300, or KONG LS9 2650. It is a direct bolt on to any of these...

High-Performance Supercharger Intercooler Bricks Overview The PWR LS9 Intercooler Bricks are a high performance, bar and plate charge air cooling upgrade engineered specifically for the 6.2L supercharged LS9 in the 2009 to 2013 Corvette ZR1. Handcrafted and TIG welded in the USA, these intercooler...

Smaller and more accurate than the OG series, brushed stainless steel and laser etched with black anodized block spacers.Point at your timing! you are a bad mofo if you need these.Choose your timing cover style.NOTE! Some water pumps have a casting post in the...

2009-2013 Chevrolet Corvette C6 ZR1 Heat Exchanger Features: Handmade and professionally TIG-welded in the USA High-efficiency 42mm PWR core with rolled dimple tubes and Hemmed & Louvered R-fin technology Direct OEM-style plug-and-play installation with no modifications required Utilizes factory hoses, clamps, and mounting hardware...

If you are looking to maximize the airflow through your LS9 supercharger, Kong Performance has you covered. Our supercharger port designs are based on years of pushing the bar while breaking record after record in the world of ZR1s. All ports were designed, created,...