ADRO 911 GT3 (992.2) Carbon Front Lip
$2,500.00
The goal for ADRO's aero program for the 992.2 GT3 wasn't to reinvent the car. It was to make it faster where it counts: more downforce, at minimal drag cost, without disturbing the front-to-rear balance Porsche already tuned in. Every component in this kit earns its place by contributing to that single objective.
The front lip manages the air arriving at the nose, reducing the high-pressure air that would otherwise push under the car and create front-end lift. Cleaning up the flow before it reaches the underbody sets up everything the skirts and diffuser do behind it. The front end has to be right for the rest of the car to work. More front grip, cleaner airflow, no compromise to the OEM lines.
Paired as a complete system, the full 992.2 GT3 aero kit increases downforce by 21% over stock for roughly a 1% drag penalty, based on CFD simulation at 180 km/h (112 mph), while holding the GT3's original front-to-rear balance. In raw terms, that's 244N (55 lbs) of load at that speed — but downforce isn't ballast. It presses the tires into the road without adding weight the car has to carry through a corner or haul down under braking, and it builds with speed, so there's more of it exactly when you're leaning on the car hardest. That's balanced grip you can actually use, with almost no loss of straight-line speed.
| Measurement | Stock | ADRO Full Kit | Increase |
|---|---|---|---|
| Downforce | 1145 N | 1,389 N | +244 N (Approximately 55 lbs) |
| Drag | 1071 N | 1,083 N | +12 N (Approximately 3 lbs) |
NOTE: Fits 992.2 GT3
If you drive your GT3 hard — track days, hillclimbs, spirited road work — this kit gives you a serious, balanced step in downforce without upsetting the character Porsche built into the car. It's the ADRO foundation for the newest GT3: engineered properly, and designed to hold the balance that matters while making you faster.
Ready to build a GT3 that carries more speed everywhere it matters? See you at the track!