2018 Audi TT Quattro Base Performance Parts

Convert your AN-8 ORB port to an AN-6 Male flare fitting with Viton O-Ring *O-Ring on AN6 side is only utilized if threading into ORB port

Use this adapter to convert your AN8 fuel rail to AN6 female ORB with this helpful fitting!

6ft of 3mm Vacuum Line in Black

The Precision Raceworks Plug-n-Play Ethanol Sensor Breakout Harness allows you to have a clean wiring solution to split the signal coming from your ethanol sensor between 2 analyzers (Example signal going to ECU or controller and to a gauge or Bluetooth display at the...

This Plug-n-Play Ethanol Sensor Harness from Precision Raceworks is certified by Motiv and directly compatible with the ReFlex+. This harness is a must for anyone wanting to connect an Ethanol Content Sensor to your Re|Flex+ allowing control based on real time ethanol content. For...

This is the same pressure switch that comes with all of our pump activation harnesses. It includes wires attached with the same 2-pin connector found on our pump activation harness. Available as 13psi or 30psi switches.

Introducing the Precision Raceworks In-Line Fuel Filter! This fuel filter features a precision machined aluminum body and fittings. AN8 female ORB on each end. *Does not include any mounting Recommended Fittings for ends AN-8 ORB to AN-6 Male Flare AN-8 ORB to AN-6 Female...

Featuring the Precision Raceworks 1/8" NPT Tap fittings! Available as either a 5/16" or 3/8" quick connect adapter, this fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect. Compatible with the Motiv 0-10 Bar pressure sensor.

2 Wire electrical bulkhead to pass two 12ga wires through a surface. Thread is 3/8" NPT. Includes: Main body Gland Sealing nut Lower Nut

Adjustable High Flow Fuel Pressure Regulator with 1 to 1 boost reference

The Precision Raceworks AN6 Male Check Valve is the ultimate solution to ensure optimal fuel system performance. Designed to prevent fuel from draining from your lines, this check valve is the perfect addition to your high-performance fuel system. Constructed from premium billet aluminum, featuring...

For battery in the front of the car

Cast from XG-150 high carbon alloyed iron and undergoing Thermal Stability Profiling. DBA's metallurgy is able to handle the increased stress and heat generated under intense braking application time and time again. Featuring DBA;s patented Kangaroo Paw ventilation that implements a series of 144...

Built on the foundations of DBA's T2 slot, the T3 slot design features additional, precise, CNC machined tri-symmetrical slots, resulting in an even quieter, more responsive and smoother brake pedal feel The T3 slot increases the number of exit points for brake pad friction...

The T2 slot design features precise CNC machined bi-symmetrical slots, resulting in a quieter, more responsive and smoother brake pedal feel. The T2 slot increases the number of exit points, allowing friction dust and gases to escape and enhancing the pad bite. DBA's revolutionary...