{"title":"2027 Chevrolet Corvette ZR1","description":null,"products":[{"product_id":"chevrolet-c8-zr1-zr1x-soul-competition-downpipes","title":"Chevrolet C8 ZR1 \/ ZR1X SOUL Competition Downpipes","description":"\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-C8-Corvette-ZR1-Competition-Downpipes-OEM-Comparison.jpg\" alt=\"\" width=\"1024\" height=\"682\"\u003e\u003c\/p\u003e\n\u003cp\u003eChevy continues the horsepower arms race by adding two turbos to their already potent C8 Corvette along with massive, restrictive catalytic converters to satisfy emissions regulations. For those seeking to use their car in a competition setting, eliminating these catalysts offers a significant increase in performance. SOUL downpipes bump up to 3.5″ diameter piping for maximum flow with a smooth transition down to 3″ to mate with the factory rear exhaust section. Weight savings of 32.5 lbs is also a significant benefit for overall vehicle handling.\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eDYNO PROVEN POWER\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe massive increase in efficiency from the SOUL downpipes results in \u003cb\u003ebetter response under all conditions and a noticeably harder pul\u003c\/b\u003e\u003cb\u003el throughout the power curve\u003c\/b\u003e. Independent dyo testing at Vollux Autowerks on our development car revealed \u003cstrong\u003emax gains of over 100 whp and 130 ft-lbs of torque\u003c\/strong\u003e at 4,000 RPMs and peak gains of roughly 55 whp and 30 ft-lbs of torque with factory hardware and 93 octane gas.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-C8-ZR1-Competition-Downpipes-Dyno-Chart.jpg\" alt=\"\" width=\"1024\" height=\"525\"\u003e\u003c\/p\u003e\n\u003cp\u003eThose running a tuning device should expect to see even greater gains between the increase in efficiency and larger diameter of the SOUL 3.5″ piping. For further reference, a second round of dyno testing was done at KIES Motorsport with the full SOUL 3.5″ Competition Exhaust System (blue dyno graph lines). The addition of Soler Performance Throttle Bodies and a JB4 piggyback tuning device (green dyno graph lines) added further gains of over 110whp and 163 ft-lbs of torque! Race gas would easily allow for power numbers over 1,200 whp.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-C8-Corvette-ZR1-Dyno-Chart-Comparison.jpg\" alt=\"\" width=\"1024\" height=\"521\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003e\u003cb\u003eHAND-CRAFTED CONSTRUCTION\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eMandrel bent, durable .065″” T304L stainless steel tubing\u003c\/p\u003e\n\u003cp\u003eBack purged TIG welding (with ARCAL™ Prime argon gas) ensures proper weld penetration for exceptional strength and longevity\u003c\/p\u003e\n\u003cp\u003eWater jet cut flanges and brackets are made to ISO 9001:2015 standards with ultra-tight tolerances of +\/- 0.003 inches for extreme precision\u003c\/p\u003e\n\u003cp\u003eFabricated using thick-gauge aluminum fixtures that act as a heat sink during the welding process to prevent any warpage\u003c\/p\u003e\n\u003cp\u003e321 stainless steel embossed heat shielding dampens vibrations and encourages thermal stand-off with micro air pockets\u003c\/p\u003e \u003ch2\u003e\u003cb\u003eBOLT-ON AND GO\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eEvery downpipe undergoes rigorous quality control and is fixture-tested to guarantee precise fitment. After passing QC, each downpipe is foam-packed to ensure it arrives in perfect condition. Four new gaskets and hardware are included.\u003c\/p\u003e \u003ch2\u003e\u003cb\u003eBACKED BY LIFETIME WARRANTY\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eEnjoy your SOUL exhaust components with confidence on both the street and track as they are covered by our Lifetime Warranty! Our team will quickly work with you to resolve any issues or answer any questions that you may have.\u003c\/p\u003e","brand":"Soul Performance","offers":[{"title":"ZR1","offer_id":47866219888796,"sku":"CHEV.C8.ZR1.CBP","price":2195.0,"currency_code":"USD","in_stock":true},{"title":"ZR1X","offer_id":47866219921564,"sku":"CHEV.C8.ZR1X.CBP","price":2195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/Soul-Performance-Products-Chevy-C8-ZR1-Competition-Downpipes-Product-2-7.jpg?v=1792261603"},{"product_id":"chevrolet-c8-zr1-zr1x-soul-sport-catalytic-converters","title":"Chevrolet C8 ZR1 \/ ZR1X SOUL Sport Catalytic Converters","description":"\u003cp\u003eChevy continues the horsepower arms race by adding two turbos to their already potent C8 Corvette along with massive, restrictive catalytic converters to satisfy emissions regulations. Replacing the catalytic converters with higher flowing units offers greater forced induction sound than a catback with additional exhaust volume that isn’t overbearing.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-Corvette-C8-ZR1-Sport-Catalytic-Converters-OEM-Comparison.jpg\" alt=\"\" width=\"1024\" height=\"682\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003e\u003cb\u003eDYNO PROVEN POWER\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe massive increase in efficiency from the SOUL downpipes results in \u003cb\u003ebetter response under all conditions and a noticeably harder pul\u003c\/b\u003e\u003cb\u003el throughout the power curve\u003c\/b\u003e. Independent dyno testing at Vollux Autowerks on our development car revealed \u003cstrong\u003emax gains of over 87 whp and 106 ft-lbs of torque\u003c\/strong\u003e at 4,280 RPMs and peak gains of roughly 6 whp and 14 ft-lbs of torque with factory hardware and 93 octane gas.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-Corvette-C8-ZR1-Sport-Catalytic-Converters-Dyno-Chart.jpg\" alt=\"\" width=\"1024\" height=\"523\"\u003e\u003c\/p\u003e\n\n\u003ch2\u003e\u003cb\u003eSATISFYING SOUND\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eWhile the factory ZR1 sounds mostly like it’s “aggressively moving a large volume of air” instead of roaring, the SOUL cats offer slightly more turbo sound and a mild increase in overall exhaust volume without being overbearing.\u003c\/p\u003e \u003ch2\u003e\u003cb\u003eHAND-CRAFTED CONSTRUCTION\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eMandrel bent, durable .065″” T304L stainless steel tubing w\/ schedule 10 piping pre-cat to lock in heat energy\u003c\/p\u003e\n\u003cp\u003ePremium SOUL designed 300 cell catalytic converter with custom specced precious metal catalyst coating and triple metal matrix core\u003c\/p\u003e\n\u003cp\u003eBack purged TIG welding (with ARCAL™ Prime argon gas) ensures proper weld penetration for exceptional strength and longevity\u003c\/p\u003e\n\u003cp\u003eWater jet cut brackets are made to ISO 9001:2015 standards with ultra-tight tolerances of +\/- 0.003 inches for extreme precision\u003c\/p\u003e\n\u003cp\u003eFabricated using thick-gauge aluminum fixtures that act as a heat sink during the welding process to prevent any warpage\u003c\/p\u003e\n\u003cp\u003eHand-applied heat shielding prevents radiant heat from shedding into the engine bay\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/02\/SOUL-Cat.jpg\" alt=\"\" width=\"626\" height=\"557\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eBOLT-ON AND GO\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eEach set of ZR1 catalytic converters undergo rigorous quality control and is fixture-tested to guarantee precise fitment. After passing QC, each component is foam-packed to ensure it arrives in perfect condition. New gaskets and hardware are included for a seamless installation.\u003c\/p\u003e \u003ch2\u003e\u003cb\u003eBACKED BY LIFETIME WARRANTY\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eEnjoy your SOUL exhaust components with confidence on both the street and track as they are covered by our Lifetime Warranty! Our team will quickly work with you to resolve any issues or answer any questions that you may have.\u003c\/p\u003e","brand":"Soul Performance","offers":[{"title":"ZR1","offer_id":47866221297820,"sku":"CHEV.C8.ZR1.SCC","price":6895.0,"currency_code":"USD","in_stock":true},{"title":"ZR1X","offer_id":47866221330588,"sku":"CHEV.C8.ZR1X.SCC","price":6895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/Soul-Performance-Products-Chevy-Corvette-C8-ZR1-Sport-Catalytic-Converters-Product-2-6.jpg?v=1792261606"},{"product_id":"c8-corvette-r-t-catback","title":"C8 Corvette R\/T Catback","description":"\u003cp\u003eAmerican Racing Headers is proud to announce our new 2020 Corvette C8 R\/T Catbacks are ready for market! Regardless of the C8 package you have, American Racing Headers will have an exhaust system for you. Our catback exhaust systems will have polished stainless steel tips or black powder coated tips. Our catback does not incorporate NPP valves to ensure the sound is badass all the time. Our system has been developed for performance, sound, and most importantly no drone. As always, all of our products are made using T-304 stainless steel and is backed by our Lifetime Warranty. Give your C8 the catback system it deserves, give your vette American Racing Headers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTALL GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct features on this system includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% Made in the USA - Never Outsourced\u003c\/li\u003e\n\u003cli\u003eMade entirely of 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e3\/8\" thick laser-cut flanges for a warp-free seal\u003c\/li\u003e\n\u003cli\u003eHand-ported TIG welded inlets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAttn.\u003c\/strong\u003e All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads\/highways and may be subject to fines and\/or criminal liability as per the Clean Air Act.\u003c\/p\u003e","brand":"American Racing Headers","offers":[{"title":"Polished Stainless Steel","offer_id":47866245447836,"sku":"150388","price":3719.34,"currency_code":"USD","in_stock":true},{"title":"Black Powder Coated","offer_id":47866245480604,"sku":"150389","price":3719.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/C8CorvetteCatbackBack2v1.png?v=1792262123"},{"product_id":"c8-corvette-headers","title":"C8 Corvette Headers","description":"\u003cp\u003eWe are thrilled to offer you this incredible header system for your C8 Corvette. The kit is a direct bolt-in made entirely in the US using 304 S\/S throughout. Our Header kit picked up \u003cem\u003e\u003cstrong\u003e+17HP and +33RWTQ at peak and as much as 37HP and 37TQ across the mid range!\u003c\/strong\u003e\u003c\/em\u003e Enjoy the increased performance and badass sound these headers offer. Read the full C8 story here!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAmerican Racing Headers is proud to announce our Corvette Headers are CARB Legal #D-693-3:\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eINSTALL GUIDE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct features on this system includes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli type=\"disc\"\u003e100% Made in the USA - Never Outsourced\u003c\/li\u003e\n\u003cli type=\"disc\"\u003eMade entirely of 304 stainless steel\u003c\/li\u003e\n\u003cli type=\"disc\"\u003e3\/8\" thick laser-cut flanges for a warp-free seal\u003c\/li\u003e\n\u003cli type=\"disc\"\u003eHand-ported TIG welded inlets\u003c\/li\u003e\n\u003cli type=\"disc\"\u003eOptimized primary tube routing for superior fit and performance\u003c\/li\u003e\n\u003cli type=\"disc\"\u003eMerge collectors with scavenger spikes\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eAttn.\u003c\/strong\u003e All ARH products are exclusively manufactured for racing purposes. Installing these products on any vehicle eliminates the legal use, in any capacity, on public roads\/highways and may be subject to fines and\/or criminal liability as per the Clean Air Act.\u003c\/p\u003e","brand":"American Racing Headers","offers":[{"title":"1-7\/8\" x 3\" \/ Base\/Coupe \/ Do Not Include","offer_id":47866254753948,"sku":"150378","price":2373.41,"currency_code":"USD","in_stock":true},{"title":"1-7\/8\" x 3\" \/ Z51\/Convertible \/ Do Not Include","offer_id":47866254786716,"sku":"150378","price":2373.41,"currency_code":"USD","in_stock":true},{"title":"2\" x 3\" \/ Base\/Coupe \/ Do Not Include","offer_id":47866254819484,"sku":"150379","price":2493.58,"currency_code":"USD","in_stock":true},{"title":"2\" x 3\" \/ Z51\/Convertible \/ Do Not Include","offer_id":47866254852252,"sku":"150379","price":2493.58,"currency_code":"USD","in_stock":true},{"title":"1-7\/8\" x 3\" \/ Base\/Coupe \/ Include","offer_id":47866254885020,"sku":"150378 + 150413","price":5718.41,"currency_code":"USD","in_stock":true},{"title":"1-7\/8\" x 3\" \/ Z51\/Convertible \/ Include","offer_id":47866254917788,"sku":"150378 + 150413","price":5718.41,"currency_code":"USD","in_stock":true},{"title":"2\" x 3\" \/ Base\/Coupe \/ Include","offer_id":47866254950556,"sku":"150379 + 150413","price":5838.58,"currency_code":"USD","in_stock":true},{"title":"2\" x 3\" \/ Z51\/Convertible \/ Include","offer_id":47866254983324,"sku":"150379 + 150413","price":5838.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/C8CorvetteHeadersandKit_c06a267e-260a-4ecf-a330-5d7a9b7a8039.png?v=1792262126"},{"product_id":"chevrolet-c8-zr1-zr1x-soul-3-5-sport-exhaust-package","title":"Chevrolet C8 ZR1 \/ ZR1X SOUL 3.5″ Sport Exhaust Package","description":"\u003cp\u003eOur goal was to produce a complete exhaust system designed to support maximum power gains while unlocking the muted exotic flat-plane crank V8 sound desperately missing from the factory exhaust system. Chevy continues the horsepower arms race by adding two turbos to their already potent C8 Corvette along with massive, restrictive catalytic converters to satisfy emissions regulations. Replacing the catalytic converters with higher flowing units offers greater forced induction sound\u003c\/p\u003e\n\u003cp\u003eThe factory downpipe to rear exhaust connection is roughly 3″. The SOUL Sport Exhaust Package is 3.5″ in diameter from turbo back including the primary tip outlets while the secondary tip outlets are 3″ for unrestricted maximum flow.\u003c\/p\u003e\n\u003cp\u003eThe massive increase in efficiency results in better response under all conditions and a noticeably harder pull throughout the power curve. Weight savings of 55 lbs (roughly 1% of the total vehicle weight!) also offers a significant benefit for overall vehicle handling.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-C8-Corvette-ZR1-3.5-Inch-Sport-Exhaust-Package-OEM-Comparisonjpg.jpg\" alt=\"\" width=\"1024\" height=\"682\"\u003e\u003c\/p\u003e\n\n\n\u003ch2\u003e\u003cstrong\u003eDYNO PROVEN POWER\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe massive increase in efficiency from the SOUL downpipes results in better response under all conditions and a noticeably harder pull throughout the power curve. Independent dyno testing at Vollux Autowerks on our development car revealed max gains of over 87 whp and 106 ft-lbs of torque at 4,280 RPMs with factory hardware and 93 octane gas.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-C8-Corvette-ZR1-3.5-Inch-Sport-Exhaust-Package-Dyno-Graph.jpg\" alt=\"\" width=\"1024\" height=\"536\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSATISFYING SOUND\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eAfter testing several different configurations during the R\u0026amp;D process, we found that blending both exhaust banks with a 3D printed merge outlet produced the most pleasing exhaust note - we make your ZR1 sound like it has 1,000 horsepower.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCold start is very aggressive but settles down quickly.\u003c\/li\u003e\n\u003cli\u003eWhile the factory ZR1 sounds mostly like it’s “aggressively moving a large volume of air” instead of roaring, the SOUL system offers a fuller, exotic sounding tone befitting of a highly tuned flat-plane crank 5.5L engine.\u003c\/li\u003e\n\u003cli\u003eTurbo sound is abundant - expect greater levels of boost volume!\u003c\/li\u003e\n\u003cli\u003eStraight-through design offers a significant increase in volume without being obnoxious in the cabin - feel it in your ears, not your bones.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch2\u003e\u003cstrong\u003eHAND-CRAFTED CONSTRUCTION\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eMandrel bent, durable .065″” T304L stainless steel tubing w\/ schedule 10 piping pre-cat to lock in heat energy\u003c\/p\u003e\n\u003cp\u003eUsing next-generation metal 3D printing technology, we engineered a 316L tip outlet to deliver optimum flow into the bumper mounted tips\u003c\/p\u003e\n\u003cp\u003ePremium SOUL designed 300 cell catalytic converter with custom specced precious metal catalyst coating and triple metal matrix core\u003c\/p\u003e\n\u003cp\u003eBack purged TIG welding (with ARCAL™ Prime argon gas) ensures proper weld penetration for exceptional strength and longevity\u003c\/p\u003e\n\u003cp\u003eWater jet cut flanges and brackets are made to ISO 9001:2015 standards with ultra-tight tolerances of +\/- 0.003 inches for extreme precision\u003c\/p\u003e\n\u003cp\u003eFabricated using thick-gauge aluminum fixtures that act as a heat sink during the welding process to prevent any warpage\u003c\/p\u003e\n\u003cp\u003eHand-applied heat shielding prevents radiant heat from shedding into the engine bay\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/02\/SOUL-Cat.jpg\" width=\"659\" height=\"587\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBOLT-ON AND GO\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eEvery ZR1 exhaust system undergoes rigorous quality control and is fixture-tested to guarantee precise fitment. After passing QC, each component is foam-packed to ensure it arrives in perfect condition. Stainless steel brackets and wiring harness extensions are included to mount the factory electronic exhaust valves to the transmission to prevent a check engine light. New gaskets and hardware are included for a seamless installation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-C8-ZR1-3.5-Inch-Sport-Exhaust-Package-Fabrication.jpg\" alt=\"\" width=\"1024\" height=\"682\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eBACKED BY LIFETIME WARRANTY\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eEnjoy your SOUL exhaust components with confidence on both the street and track as they are covered by our Lifetime Warranty! Our team will quickly work with you to resolve any issues or answer any questions that you may have.\u003c\/p\u003e","brand":"Soul Performance","offers":[{"title":"ZR1","offer_id":47866265436316,"sku":"CHEV.C8.ZR1.STPKG","price":10995.0,"currency_code":"USD","in_stock":true},{"title":"ZR1X","offer_id":47866265469084,"sku":"CHEV.C8.ZR1X.STPKG","price":10995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/Soul-Performance-Products-Chevy-C8-Corvette-ZR1-3.5-Inch-Sport-Exhaust-Package-Product-4.jpg?v=1792261635"},{"product_id":"chevrolet-c8-zr1-zr1x-soul-3-5-competition-exhaust-package","title":"Chevrolet C8 ZR1 \/ ZR1X SOUL 3.5″ Competition Exhaust Package","description":"\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-C8-Corvette-ZR1-3.5-Inch-Competition-Exhaust-Package-OEM-Comparison.jpg\" alt=\"\" width=\"1024\" height=\"682\"\u003e\u003c\/p\u003e\n\u003cp\u003eOur goal was to produce a complete exhaust system designed to support maximum power gains while unlocking the muted exotic flat-plane crank V8 sound desperately missing from the factory exhaust system. Chevy continues the horsepower arms race by adding two turbos to their already potent C8 Corvette along with massive, restrictive catalytic converters to satisfy emissions regulations. For those seeking to use their car in a competition setting, eliminating these catalysts offers a significant increase in performance. The factory downpipe to rear exhaust connection is roughly 3″. The SOUL Competition Exhaust Package is 3.5″ in diameter from turbo back including the primary tip outlets while the secondary tip outlets are 3″ for unrestricted maximum flow.\u003c\/p\u003e\n\u003cp\u003eThe massive increase in efficiency results in \u003cb\u003ebetter response under all conditions and a noticeably harder pull throughout the power curve\u003c\/b\u003e. Weight savings of 80 lbs (roughly 2% of the total vehicle weight!) also offers a significant benefit for overall vehicle handling.\u003c\/p\u003e \u003ch2\u003e\u003cb\u003eDYNO PROVEN POWER\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eOur first round of independent dyno testing at Vollux Autowerks with hardware only on our development car revealed \u003cstrong\u003emax gains of over 125 whp and 168 ft-lbs of torque\u003c\/strong\u003e at 4,000 RPMs and peak gains of roughly 65 whp and 43 ft-lbs of torque on 93 octane gas (blue dyno graph lines).\u003c\/p\u003e \u003cp\u003eDuring a second round of dyno testing at KIES Motorsport with the full SOUL 3.5″ Competition Exhaust System we added Soler Performance Throttle Bodies and a JB4 piggyback tuning device (green dyno graph lines) which added \u003cem\u003efurther\u003c\/em\u003e gains of over 110whp and 163 ft-lbs of torque for a total of over \u003cstrong\u003e173 whp and 209 ft-lbs of torque gained from stock\u003c\/strong\u003e! Race gas would easily allow for power numbers over 1,200 whp.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-C8-Corvette-ZR1-Dyno-Chart-Comparison.jpg\" alt=\"\" width=\"1024\" height=\"521\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eSATISFYING SOUND\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eAfter testing several different configurations during the R\u0026amp;D process, we found that blending both exhaust banks with a 3D printed merge outlet produced the most pleasing exhaust note - we make your ZR1 sound like it has 1,000 horsepower.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCold start is highly aggressive but settles down quickly.\u003c\/li\u003e\n\u003cli\u003eWhile the factory ZR1 sounds mostly like it’s “aggressively moving a large volume of air” instead of roaring, the SOUL system offers a fuller, exotic sounding tone befitting of a highly tuned flat-plane crank 5.5L engine.\u003c\/li\u003e\n\u003cli\u003eTurbo sound is abundant - expect much greater levels of boost volume!\u003c\/li\u003e\n\u003cli\u003eStraight-through design offers a significant increase in volume without being too obnoxious in the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003e\u003cb\u003eHAND-CRAFTED CONSTRUCTION\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eMandrel bent, durable .065″” T304L stainless steel tubing\u003c\/p\u003e\n\u003cp\u003eUsing next-generation metal 3D printing technology, we engineered a 316L tip outlet to deliver optimum flow into the bumper mounted tips\u003c\/p\u003e\n\u003cp\u003eBack purged TIG welding (with ARCAL™ Prime argon gas) ensures proper weld penetration for exceptional strength and longevity\u003c\/p\u003e\n\u003cp\u003eWater jet cut flanges and brackets are made to ISO 9001:2015 standards with ultra-tight tolerances of +\/- 0.003 inches for extreme precision\u003c\/p\u003e\n\u003cp\u003eFabricated using thick-gauge aluminum fixtures that act as a heat sink during the welding process to prevent any warpage\u003c\/p\u003e\n\u003cp\u003eHand-applied heat shielding prevents radiant heat from shedding into the engine bay\u003c\/p\u003e \u003ch2\u003e\u003cb\u003eBOLT-ON AND GO\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eEvery ZR1 exhaust system undergoes rigorous quality control and is fixture-tested to guarantee precise fitment. After passing QC, each component is foam-packed to ensure it arrives in perfect condition. Stainless steel brackets and wiring harness extensions are included to mount the factory electronic exhaust valves to the transmission to prevent a check engine light. New gaskets and hardware are included for a seamless installation.\u003c\/p\u003e \u003ch2\u003e\u003cb\u003eBACKED BY LIFETIME WARRANTY\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eEnjoy your SOUL exhaust components with confidence on both the street and track as they are covered by our Lifetime Warranty! Our team will quickly work with you to resolve any issues or answer any questions that you may have.\u003c\/p\u003e","brand":"Soul Performance","offers":[{"title":"ZR1","offer_id":47866265731228,"sku":"CHEV.C8.ZR1.COPKG","price":6395.0,"currency_code":"USD","in_stock":true},{"title":"ZR1X","offer_id":47866265763996,"sku":"CHEV.C8.ZR1X.COPKG","price":6395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/Soul-Performance-Products-Chevy-C8-ZR1-3.5-Inch-Competition-Exhaust-Package-Product-4.jpg?v=1792261636"},{"product_id":"chevrolet-c8-zr1-zr1x-soul-performance-rear-exhaust-system","title":"Chevrolet C8 ZR1 \/ ZR1X SOUL Performance Rear Exhaust System","description":"\u003ch2\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-C8-ZR1-Performance-Exhaust-System-OEM-Comparison.jpg\" alt=\"\" width=\"1024\" height=\"682\"\u003e\u003c\/h2\u003e\n\u003cp\u003eOur goal was to craft a non-valved large diameter exhaust system with maximum flow to offer the greatest increase exotic flat-plane crank V8 sound. The SOUL Performance Exhaust System starts at 3″ in diameter to mate with the factory style downpipes and quickly expands to 3.5″ in diameter out through the primary tip outlets while the secondary tip outlets are 3″ for unrestricted maximum flow. For those interested in a full 3.5″ system from turbos back we offer both catted and catless competition systems.\u003c\/p\u003e\n\u003cp\u003eThe increase in efficiency results in better response under all conditions. Weight savings of 40 lbs (roughly 1% of the total vehicle weight!) also offers a valuable benefit for overall vehicle handling and braking in a car capable of tremendous speed and acceleration.\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eDYNO PROVEN POWER\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eOn our development ZR1 with SOUL Competition Downpipes alone, we saw max power gains cresting 1,025 whp and 824 ft-lbs of torque. Adding our Performance Rear Exhaust System (in full 3.5″ design without the factory neckdown to downpipes) brought max power to 1,033 whp and 839 ft-lbs of torque. While most of the power gains on the ZR1 can be found by upgrading the downpipes, it’s clear that increasing the flow of the rear exhaust system will also add power and response coming in around 4,000 RPMs and holding to redline.\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eHAND-CRAFTED CONSTRUCTION\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eMandrel bent, durable .065″” T304L stainless steel tubing\u003c\/p\u003e\n\u003cp\u003eUsing next-generation metal 3D printing technology, we engineered a 316L tip outlet to deliver optimum flow into the bumper mounted tips\u003c\/p\u003e\n\u003cp\u003eBack purged TIG welding (with ARCAL™ Prime argon gas) ensures proper weld penetration for exceptional strength and longevity\u003c\/p\u003e\n\u003cp\u003eWater jet cut flanges and brackets are made to ISO 9001:2015 standards with ultra-tight tolerances of +\/- 0.003 inches for extreme precision\u003c\/p\u003e\n\u003cp\u003eFabricated using thick-gauge aluminum fixtures that act as a heat sink during the welding process to prevent any warpage\u003c\/p\u003e \u003ch2\u003e\u003cb\u003eBOLT-ON AND GO\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eEvery ZR1 exhaust system undergoes rigorous quality control and is fixture-tested to guarantee precise fitment. After passing QC, each component is foam-packed to ensure it arrives in perfect condition. Stainless steel brackets and wiring harness extensions are included to mount the factory electronic exhaust valves to the transmission to prevent a check engine light. New gaskets and hardware are included for a seamless installation.\u003c\/p\u003e \u003ch2\u003e\u003cb\u003eBACKED BY LIFETIME WARRANTY\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eEnjoy your SOUL exhaust components with confidence on both the street and track as they are covered by our Lifetime Warranty! Our team will quickly work with you to resolve any issues or answer any questions that you may have.\u003c\/p\u003e","brand":"Soul Performance","offers":[{"title":"Default Title","offer_id":47866266058908,"sku":"CHEV.C8.ZR1.ESX","price":3895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/Soul-Performance-Products-Chevy-C8-ZR1-Performance-Exhaust-System-Product-4.jpg?v=1792261638"},{"product_id":"chevrolet-c8-corvette-non-npp-soul-valved-exhaust-system","title":"Chevrolet C8 Corvette Non-NPP SOUL Valved Exhaust System","description":"\u003ch4\u003e\u003cstrong\u003eDEVELOPMENT GOALS\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImprove upon the factory design to increase and refine the V8 tone.\u003c\/li\u003e\n\u003cli\u003eIncrease the presence and character of the exhaust note in the cabin while maintaining a reasonable level of resonance \/ drone while driving in both the valves closed and open modes through our signature drone fighting capabilities.\u003c\/li\u003e\n\u003cli\u003eHeighten aggressiveness with valves open while maintaining an overall sound level potential \/ quality that can still be reasonably driven on the street in combination with other complementary aftermarket exhaust components - such as Sport Catalytic Converters or headers.\u003c\/li\u003e\n\u003cli\u003eOffer the ability to notably reduce the sound level of the car outside to fly under the radar when necessary.\u003c\/li\u003e\n\u003cli\u003eAchieve an effective delta in sound between both modes for two usable, well engineered experiences - mild and wild, even for cars not fitted from the factory with valve control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eRESEARCH \u0026amp; DEVELOPMENT\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eWith valves closed, the exhaust is routed through a bespoke SOUL chambered muffler we designed with an internal X-Pipe to meet our sound goals. This unique muffler was crafted to match our high standard of drone fighting mufflers that we are known for in the Porsche world. We tested a more traditional perforated core muffler design as well but the carefully engineered chambers of the final muffler result in a more aggressive sound on and off throttle with reduced undesirable tones. With valves open, exhaust flow is free to exit through 3″ piping for a thunderous roar. Secondary flow through the muffler and x-pipe reduces rasp and smooths the exhaust note for a higher pitched, more refined sound. The end result is two distinct and enjoyable sound modes - mild and wild.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/06\/Soul-Performance-Products-Chevy-Corvette-C8-Valved-Exhaust-System-Muffler-Diagram.jpg\" alt=\"\" width=\"1024\" height=\"529\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAFM valve deletes\u003c\/strong\u003e are included for the factory exhaust valves (designed to limit flow in four-cylinder mode) in order to delete them without triggering a check engine light.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/02\/Soul-Performance-Products-Chevy-Corvette-C8-Valved-Exhaust-System-AFM-Delete-Module.jpg\" alt=\"\" width=\"1000\" height=\"511\"\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the close proximity of the exhaust to sensitive components and plastic, heat shields are a MUST. We’ve partnered with PTP Turbo Blankets to produce a bespoke, form-fitting heat shielding solution. Far superior to no-name brand copies, PTP Lava Turbo Blankets are constructed with an outer layer made from pulverized volcanic lava rock (Rated 1800°F Direct Heat \/ 2500°F Radiant Heat) formed into fabric and woven into a tight mesh weave. These blankets are internally insulated with high temperature calcium magnesium silicate wool (Rated 1832°F Continuous \/ 2300°F Peak) overlaid with a high temperature stainless steel mesh for increased durability and improved thermal resistance. The Lava Blankets are designed to withstand the harshest of conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONSTRUCTION:\u003c\/strong\u003e Each component is made in-house by our fabrication team from mandrel bent .060″ wall T304L stainless steel tubing, laser cut brackets, and waterjet cut flanges. Welds are back purged for proper penetration and maximum durability. Our 4″ double wall stainless steel tips are available in a number of finishes and have depth adjustment for perfect fitment to meet your desired aesthetic.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/02\/Soul-Performance-Products-Chevy-Corvette-C8-Valved-Exhaust-System-Fabrication.jpg\" alt=\"\" width=\"1024\" height=\"610\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBOLT ON AND GO: \u003c\/b\u003eEach exhaust component is built and tested in a thick gauge aluminum fixture (which prevents warping) to ensure perfect fitment. Every piece is rigorously quality-checked prior to shipping and then foam packed to ensure they arrive in perfect condition.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eABOUT PTP TURBO BLANKETS: \u003c\/strong\u003e Every PTP Turbo Blanket is hand-crafted in North America and quality is guaranteed. PTP Turbo Blankets are well known in the industry for their high standards for material selection, design, construction, and also for their ability to provide these high quality products at an affordable price. It is important to note that, as unfortunate as it is, there are many imitation turbo blankets out there - often made in China. These imitation turbo blankets are manufactured using much inferior materials for construction. Imitation turbo blankets can be ineffective or worse, they can be dangerous if flammable materials are used. PTP Turbo Blankets and wraps are the result of years of product research and development. The exact same materials that are used in their turbo blankets and wraps are currently being used in multiple military applications. Their materials are on the cutting edge of heat insulation technology - for more information see this full research paper here.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/soulpp.com\/wp-content\/uploads\/2026\/02\/Soul-Performance-Products-Chevy-Corvette-C8-Exhaust-System-PTP-Blanket-Detail-Site.jpg\" alt=\"\" width=\"1000\" height=\"623\"\u003e\u003c\/p\u003e \u003cp\u003e\u003cb\u003eLIFETIME WARRANTY: \u003c\/b\u003eEnjoy your SOUL exhaust components with confidence on both the street and track as they are covered by our Lifetime Warranty! Our team will quickly work with you to resolve any issues or answer any questions that you may have.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT NOTE:\u003c\/strong\u003e \u003cstrong\u003eYou\u003c\/strong\u003e\u003cstrong\u003e may experience a AFM check engine light codes after installing an aftermarket rear exhaust system on your C8. Recalibrating the AFM codes at your local dealer may be required.\u003c\/strong\u003e The procedure on average takes 15 minutes and is done through their computer system.\u003c\/p\u003e","brand":"Soul Performance","offers":[{"title":"Matte Black \/ Dual Wall 4\" Straight Cut","offer_id":47866285260956,"sku":"chevrolet-c8-corvette-non-npp-soul-valved-exhaust-system-1","price":5570.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ Dual Wall 4\" Slash Cut","offer_id":47866285293724,"sku":"chevrolet-c8-corvette-non-npp-soul-valved-exhaust-system-2","price":5570.0,"currency_code":"USD","in_stock":true},{"title":"Brushed \/ Dual Wall 4\" Slash Cut","offer_id":47866285326492,"sku":"CHEV.C8.VESVC.SLT.BR","price":5685.0,"currency_code":"USD","in_stock":true},{"title":"Brushed \/ Dual Wall 4\" Straight Cut","offer_id":47866285359260,"sku":"CHEV.C8.VESVC.SWT.BR","price":5685.0,"currency_code":"USD","in_stock":true},{"title":"Polished Chrome \/ Dual Wall 4\" Straight Cut","offer_id":47866285392028,"sku":"CHEV.C8.VESVC.SWT.POL","price":5570.0,"currency_code":"USD","in_stock":true},{"title":"Polished Chrome \/ Dual Wall 4\" Slash Cut","offer_id":47866285424796,"sku":"CHEV.C8.VESVC.SLT.POL","price":5570.0,"currency_code":"USD","in_stock":true},{"title":"Signature Satin \/ Dual Wall 4\" Straight Cut","offer_id":47866285457564,"sku":"CHEV.C8.VESVC.SWT","price":5570.0,"currency_code":"USD","in_stock":true},{"title":"Signature Satin \/ Dual Wall 4\" Slash Cut","offer_id":47866285490332,"sku":"CHEV.C8.VESVC.SLT","price":5570.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/SOUL-Performance-Chevy-Corvette-C9-NonNPP-Valved-Exhaust-System-2.jpg?v=1792261665"},{"product_id":"kong-performance-cnc-porting-service-for-magnuson-lpe-c8-tvs-2650-supercharger","title":"Kong Performance CNC Porting Service for Magnuson\/LPE C8 TVS 2650 Supercharger","description":"\u003cp\u003eIf you are looking to maximize the airflow through your Magnuson\/Lingenfelter TVS 2650 for the C8, Kong Performance has you covered. Our supercharger port designs are based on years of pushing the bar while breaking record after record in the world of TVS Style Superchargers. All ports are designed, created, tested, and programmed on our 5 axis CNC in house using highly advanced porting software! \u003cstrong\u003eWe have seen\u003c\/strong\u003e \u003cstrong\u003e80+rwhp proven gains in back to back testing with proper supporting mods!!!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFAST TURN AROUND! \u003c\/strong\u003eWe typically operate at a 3-7 business day turn around time on porting so we can get your supercharger back to you as quickly as possible!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe process is simple!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOnce you checkout, print out your emailed receipt and put that in a box with your supercharger. Make sure the supercharger is padded well on all sides. (Do not use packing peanuts)\u003c\/li\u003e\n\u003cli\u003eBe sure to remove all sensors and gaskets please!\u003c\/li\u003e\n\u003cli\u003eWe prefer UPS, Fedex, or DHL for shipping to us.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCUSTOM SHIPPING CONTAINERS AVAILABLE !\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDo you need a shipping container to keep your supercharger safe when shipping it in? If so, click ---\u0026gt; \u003cstrong\u003ehere \u003c\/strong\u003e\u0026lt;--- to add one of our custom molded shipping containers to your order.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eShip to address:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKong Performance\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8 Smithbridge Rd.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChester Heights, PA 19017\u003c\/strong\u003e\u003c\/p\u003e","brand":"Kong Performance","offers":[{"title":"Default Title","offer_id":47870537924764,"sku":"kong-performance-cnc-porting-service-for-magnuson-lpe-c8-tvs-2650-supercharger","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/448590523_1128451708370140_5577872167079996883_n.jpg?v=1792262351"},{"product_id":"c8-wild","title":"C8 Wild","description":"","brand":"Mighty Mouse Solutions","offers":[{"title":"Standard \/ 8AN 800hp \/ -AN Male Flare","offer_id":47957587689628,"sku":"61.08","price":400.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 8AN 800hp \/ OEM Quick Connect","offer_id":47957587722396,"sku":"61Q.08","price":400.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 10AN 1000hp \/ -AN Male Flare","offer_id":47957587755164,"sku":"61","price":405.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ 10AN 1000hp \/ OEM Quick Connect","offer_id":47957587787932,"sku":"61Q","price":405.0,"currency_code":"USD","in_stock":true},{"title":"Fender (Procharger) \/ 8AN 800hp \/ -AN Male Flare","offer_id":47957587820700,"sku":"61.08P","price":452.0,"currency_code":"USD","in_stock":true},{"title":"Fender (Procharger) \/ 8AN 800hp \/ OEM Quick Connect","offer_id":47957587853468,"sku":"61Q.08P","price":452.0,"currency_code":"USD","in_stock":true},{"title":"Fender (Procharger) \/ 10AN 1000hp \/ -AN Male Flare","offer_id":47957587886236,"sku":"61.P","price":459.0,"currency_code":"USD","in_stock":true},{"title":"Fender (Procharger) \/ 10AN 1000hp \/ OEM Quick Connect","offer_id":47957587919004,"sku":"61Q.P","price":459.0,"currency_code":"USD","in_stock":true},{"title":"Convertible \/ 10AN 1000hp \/ -AN Male Flare","offer_id":47957587951772,"sku":"61.V","price":426.0,"currency_code":"USD","in_stock":true},{"title":"Convertible \/ 10AN 1000hp \/ OEM Quick Connect","offer_id":47957587984540,"sku":"61Q.V","price":426.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/file_b81c1bb2-7ac8-45a1-b81d-9cde44e25d9d.jpg?v=1792262097"},{"product_id":"c8-mild","title":"C8 Mild","description":"","brand":"Mighty Mouse Solutions","offers":[{"title":"Standard \/ -AN Male Flare","offer_id":47957579694236,"sku":"60","price":363.0,"currency_code":"USD","in_stock":true},{"title":"Standard \/ OEM Quick Connect","offer_id":47957579727004,"sku":"60Q","price":363.0,"currency_code":"USD","in_stock":true},{"title":"Fender \/ -AN Male Flare","offer_id":47957579759772,"sku":"60.F","price":413.0,"currency_code":"USD","in_stock":true},{"title":"Fender \/ OEM Quick Connect","offer_id":47957579792540,"sku":"60Q.F","price":413.0,"currency_code":"USD","in_stock":true},{"title":"Convertible \/ -AN Male Flare","offer_id":47957579825308,"sku":"60.V","price":380.0,"currency_code":"USD","in_stock":true},{"title":"Convertible \/ OEM Quick Connect","offer_id":47957579858076,"sku":"60Q.V","price":380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/file_ec07589c-f31b-439b-b68a-537ec456512c.jpg?v=1792262036"},{"product_id":"c8-wild-tuner","title":"C8 Wild Tuner","description":"","brand":"Mighty Mouse Solutions","offers":[{"title":"10AN 1000hp \/ -AN Male Flare","offer_id":47870569382044,"sku":"61.PT","price":428.0,"currency_code":"USD","in_stock":true},{"title":"10AN 1000hp \/ OEM Quick Connect","offer_id":47870569414812,"sku":"61Q.PT","price":428.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/file_1e91cf49-0cd2-43c9-a95d-d9910907196a.jpg?v=1792262037"},{"product_id":"eventuri-chevrolet-corvette-c8-zr1-hard-top-convertible-black-carbon-intake-system","title":"Eventuri Chevrolet Corvette C8 ZR1 Hard-Top Convertible Black Carbon Intake System","description":"\u003cp\u003eThe Eventuri Chevrolet Corvette C8 ZR1 Hard-Top Convertible Black Carbon Intake System represents a comprehensive re-engineering of the LT7 intake architecture, delivering performance gains rarely achieved from an intake system alone. Developed from the ground up using advanced CFD analysis, dyno validation, and iterative prototyping, this system addresses the inherent airflow limitations of the OEM design while significantly increasing volumetric efficiency and turbocharger response.\u003c\/p\u003e\n\u003cp\u003eBuilding on Eventuri’s proven C8 Stingray and Z06 systems, the ZR1 intake introduces a significantly larger intake architecture unconstrained by the factory trunk panel. By eliminating this restriction, Eventuri was able to design a high-volume, organically shaped intake system paired with enlarged turbo inlet tubes, each offering approximately 30% greater internal volume compared to OEM. This increase in cross-sectional area reduces pressure drop, allowing the turbochargers to achieve target boost levels more efficiently and earlier in the RPM range.\u003c\/p\u003e\n\u003cp\u003eThe OEM airbox, derived from the LT6 Z06 platform, becomes increasingly restrictive when paired with the higher-output LT7 engine. Eventuri’s solution replaces this with a fully carbon fiber intake system utilizing their patented Venturi housing technology. This design optimizes airflow velocity while maintaining laminar flow conditions through the intake tract, reducing turbulence and improving charge consistency to each turbocharger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineering and Development\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCFD analysis was conducted extensively to refine internal geometry and airflow behavior. The intake transitions turbulent upstream air into a smooth, linear flow path through the MAF sections and into the turbochargers. The result is increased velocity without sacrificing flow stability, ensuring consistent and repeatable performance gains across the entire RPM range.\u003c\/p\u003e\n\u003cp\u003eDyno testing was carried out in a controlled environment using a stock C8 ZR1. Baseline runs were conducted at stabilized temperatures, followed by installation of the intake system and repeated runs under identical conditions. Even with higher ambient temperatures during post-installation testing, the intake delivered substantial gains, particularly in the mid-range around 5300 RPM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Components\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Double Venturi Filter Housing\u003c\/li\u003e\n\u003cli\u003eBespoke High-Flow Dry Cone Filters (ISO tested)\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Inlet Ducts with Neoprene Sealing\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Turbo Tubes (30% increased internal volume)\u003c\/li\u003e\n\u003cli\u003eClear Polycarbonate Trunk Panel (HTC-compatible)\u003c\/li\u003e\n\u003cli\u003eSilicone Couplers and Custom Flexible Hoses\u003c\/li\u003e\n\u003cli\u003eLaser-Cut Stainless Steel and Aluminum Brackets\u003c\/li\u003e\n\u003cli\u003eCustom Inlet Flanges for sealed cold air feed integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePatented Venturi Housing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe core of the system is Eventuri’s patented double Venturi filter housing, which merges dual airflow paths into a centralized high-volume chamber. As airflow transitions through the housing, the gradually reducing cross-sectional area accelerates velocity while maintaining laminar flow characteristics. This principle, similar to a velocity stack, ensures efficient air delivery to each turbocharger while minimizing drag and turbulence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThermal Management and Airflow Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbon fiber inlet ducts channel ambient air directly from the side vents into the intake system. These ducts are sealed to the filter housing using a neoprene gasket and multi-point mounting system to prevent heat soak from the engine bay. Combined with sealed inlet flanges and flexible hose connections, the system maintains a consistent supply of cold air under all driving conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: EVE-ZR1HTC-CF-INT\u003c\/li\u003e\n\u003cli\u003e100% pre-preg carbon fiber construction with no fiberglass\u003c\/li\u003e\n\u003cli\u003ePatented dual Venturi intake housing design\u003c\/li\u003e\n\u003cli\u003e30% increased turbo inlet tube volume vs OEM\u003c\/li\u003e\n\u003cli\u003eCFD-optimized airflow path for reduced turbulence and increased velocity\u003c\/li\u003e\n\u003cli\u003eClear polycarbonate trunk panel (HTC compatible)\u003c\/li\u003e\n\u003cli\u003eISO-tested dry filtration system\u003c\/li\u003e\n\u003cli\u003eDesigned and developed through extensive dyno and real-world testing\u003c\/li\u003e\n\u003cli\u003eUses two replacement filters EVE-661-G2-FTR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":47874699329692,"sku":"EVE-ZR1HTC-CF-INT","price":3595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/eventuri-c8-zr1-htc-coupe-carbon-intake-white-background.jpg?v=1792261606"},{"product_id":"eventuri-chevrolet-corvette-c8-zr1-coupe-black-carbon-intake-system","title":"Eventuri Chevrolet Corvette C8 ZR1 Coupe Black Carbon Intake System","description":"\u003cp\u003eThe Eventuri Chevrolet Corvette C8 ZR1 Coupe Black Carbon Intake System represents a comprehensive re-engineering of the LT7 intake architecture, delivering performance gains rarely achieved from an intake system alone. Developed from the ground up using advanced CFD analysis, dyno validation, and iterative prototyping, this system addresses the inherent airflow limitations of the OEM design while significantly increasing volumetric efficiency and turbocharger response.\u003c\/p\u003e\n\u003cp\u003eBuilding on Eventuri’s proven C8 Stingray and Z06 systems, the ZR1 intake introduces a significantly larger intake architecture unconstrained by the factory trunk panel. By eliminating this restriction, Eventuri was able to design a high-volume, organically shaped intake system paired with enlarged turbo inlet tubes, each offering approximately 30% greater internal volume compared to OEM. This increase in cross-sectional area reduces pressure drop, allowing the turbochargers to achieve target boost levels more efficiently and earlier in the RPM range.\u003c\/p\u003e\n\u003cp\u003eThe OEM airbox, derived from the LT6 Z06 platform, becomes increasingly restrictive when paired with the higher-output LT7 engine. Eventuri’s solution replaces this with a fully carbon fiber intake system utilizing their patented Venturi housing technology. This design optimizes airflow velocity while maintaining laminar flow conditions through the intake tract, reducing turbulence and improving charge consistency to each turbocharger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngineering and Development\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCFD analysis was conducted extensively to refine internal geometry and airflow behavior. The intake transitions turbulent upstream air into a smooth, linear flow path through the MAF sections and into the turbochargers. The result is increased velocity without sacrificing flow stability, ensuring consistent and repeatable performance gains across the entire RPM range.\u003c\/p\u003e\n\u003cp\u003eDyno testing was carried out in a controlled environment using a stock C8 ZR1. Baseline runs were conducted at stabilized temperatures, followed by installation of the intake system and repeated runs under identical conditions. Even with higher ambient temperatures during post-installation testing, the intake delivered substantial gains, particularly in the mid-range around 5300 RPM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Components\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon Fiber Double Venturi Filter Housing\u003c\/li\u003e\n\u003cli\u003eBespoke High-Flow Dry Cone Filters (ISO tested)\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Inlet Ducts with Neoprene Sealing\u003c\/li\u003e\n\u003cli\u003eCarbon Fiber Turbo Tubes (30% increased internal volume)\u003c\/li\u003e\n\u003cli\u003eClear Polycarbonate Trunk Panel (Coupe-compatible)\u003c\/li\u003e\n\u003cli\u003eSilicone Couplers and Custom Flexible Hoses\u003c\/li\u003e\n\u003cli\u003eLaser-Cut Stainless Steel and Aluminum Brackets\u003c\/li\u003e\n\u003cli\u003eCustom Inlet Flanges for sealed cold air feed integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePatented Venturi Housing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe core of the system is Eventuri’s patented double Venturi filter housing, which merges dual airflow paths into a centralized high-volume chamber. As airflow transitions through the housing, the gradually reducing cross-sectional area accelerates velocity while maintaining laminar flow characteristics. This principle, similar to a velocity stack, ensures efficient air delivery to each turbocharger while minimizing drag and turbulence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThermal Management and Airflow Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbon fiber inlet ducts channel ambient air directly from the side vents into the intake system. These ducts are sealed to the filter housing using a neoprene gasket and multi-point mounting system to prevent heat soak from the engine bay. Combined with sealed inlet flanges and flexible hose connections, the system maintains a consistent supply of cold air under all driving conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: EVE-ZR1VT-CF-INT\u003c\/li\u003e\n\u003cli\u003e100% pre-preg carbon fiber construction with no fiberglass\u003c\/li\u003e\n\u003cli\u003ePatented dual Venturi intake housing design\u003c\/li\u003e\n\u003cli\u003e30% increased turbo inlet tube volume vs OEM\u003c\/li\u003e\n\u003cli\u003eCFD-optimized airflow path for reduced turbulence and increased velocity\u003c\/li\u003e\n\u003cli\u003eClear polycarbonate trunk panel (Coupe compatible)\u003c\/li\u003e\n\u003cli\u003eISO-tested dry filtration system\u003c\/li\u003e\n\u003cli\u003eDesigned and developed through extensive dyno and real-world testing\u003c\/li\u003e\n\u003cli\u003eUses two replacement filters EVE-661-G2-FTR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":47874699559068,"sku":"EVE-ZR1VT-CF-INT","price":3595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/eventuri-c8-zr1-htc-coupe-carbon-intake-white-background_0985d9c2-dfd8-4199-9fef-eb9730b784ab.jpg?v=1792261608"},{"product_id":"eventuri-chevrolet-c8-corvette-intake-coupler-lingenfelter-ptr-manifold","title":"Eventuri Chevrolet C8 Corvette Intake Coupler - Lingenfelter pTR Manifold","description":"\u003cp\u003eThe Eventuri intake coupler for the Chevrolet C8 Corvette is engineered specifically to integrate the Eventuri carbon fiber intake system with the Lingenfelter pTR intake manifold and 95mm throttle body for the LT2 engine. This model-specific solution provides a seamless transition between the intake housing and the enlarged throttle body, allowing the full airflow potential of both systems to be realized.\u003c\/p\u003e\n\u003cp\u003eAs airflow demand increases on high-performance naturally aspirated builds, the connection point between the intake and throttle body becomes a critical area for maintaining velocity and minimizing turbulence. The Eventuri coupler features a carefully developed internal stepped profile which smoothly expands to match the 95mm throttle body diameter. This ensures a clean and efficient path into the plenum while preserving the airflow characteristics of the Eventuri intake.\u003c\/p\u003e\n\u003cp\u003eConstructed from high-quality reinforced silicone and supplied with application-specific hardware, the coupler delivers a secure, OEM-level fit while supporting the increased airflow requirements of the Lingenfelter manifold system. It is an essential component for C8 Corvette owners looking to pair the Eventuri intake with the highest-capacity intake manifold available for the LT2 platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect connection between Eventuri C8 intake and Lingenfelter pTR intake manifold\u003c\/li\u003e\n\u003cli\u003eDesigned for use with 95mm throttle body\u003c\/li\u003e\n\u003cli\u003eInternal stepped transition for smooth airflow expansion\u003c\/li\u003e\n\u003cli\u003eHigh-quality reinforced silicone construction\u003c\/li\u003e\n\u003cli\u003eMaintains airflow velocity into the plenum\u003c\/li\u003e\n\u003cli\u003eOEM-level fitment and sealing\u003c\/li\u003e\n\u003cli\u003eIncludes barb fitting and hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":47874900983964,"sku":"EVE-C8PLM-SLC","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/53169117667_376e7261d3_b.jpg?v=1792261785"},{"product_id":"eventuri-chevrolet-c8-corvette-hard-top-convertible-black-carbon-intake-system","title":"Eventuri Chevrolet C8 Corvette Hard-Top Convertible Black Carbon Intake System","description":"\u003cp\u003eThe Eventuri Chevrolet C8 Corvette \u003cstrong\u003eHard-Top Convertible\u003c\/strong\u003e Black Carbon Intake System is a purpose-built performance upgrade engineered to deliver industry-leading airflow efficiency, measurable dyno gains, and exceptional thermal control for the mid-engine Corvette platform. Developed through extensive CFD analysis and real-world testing, this system produces verified gains of 15-18 wheel horsepower and 15-16 lb-ft of torque while sharpening throttle response across the entire rev range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Information:\u003c\/strong\u003e This Eventuri intake system is designed exclusively for the Chevrolet C8 Corvette Hard-Top Convertible (HTC). It is not compatible with the C8 Corvette Coupe. For Coupe applications, please see the Eventuri C8 Corvette Coupe Carbon Intake System.\u003c\/p\u003e\n\u003cp\u003ePackaging limitations within the C8’s rear trunk area required a complete ground-up redesign rather than a simple replacement intake. Eventuri reengineered the trunk panel to accommodate a dramatically larger internal airbox volume, now recognized as the largest intake capacity available for the C8 platform. Despite the increased size, OEM trunk functionality is fully retained, allowing owners to benefit from performance gains without sacrificing practicality.\u003c\/p\u003e\n\u003cp\u003eA defining visual feature of the system is the clear polycarbonate trunk panel, which showcases the carbon fiber architecture beneath whenever the trunk is opened. This design transforms the intake into a centerpiece of the rear compartment, blending motorsport engineering with show-quality presentation.\u003c\/p\u003e\n\u003cp\u003eAt the core of the system are Eventuri’s patented Venturi filter housings. Unlike conventional cone filter designs, the Venturi geometry promotes laminar airflow by guiding air through a smoother and more controlled path toward the intake tract. This reduces turbulence and drag while increasing overall flow efficiency, creating additional headroom for tuned or higher-output applications.\u003c\/p\u003e\n\u003cp\u003eThe intake operates within a fully sealed configuration that draws air directly from the factory feeds, helping maintain consistently low intake air temperatures. Carbon fiber construction further limits heat transfer compared to traditional materials, supporting denser charge air and repeatable performance under demanding driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Eventuri intake system combines a revised airflow path with a carbon fiber assembly designed specifically for the C8 Corvette Hard-Top Convertible (HTC), providing measurable performance improvements while integrating with the vehicle’s factory mounting locations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProven gains of 15-18 wheel horsepower and 15-16 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eLargest internal intake volume currently available for the C8 platform\u003c\/li\u003e\n\u003cli\u003ePatented Eventuri Venturi filter housings engineered for laminar airflow\u003c\/li\u003e\n\u003cli\u003eFully sealed system utilizing factory air feeds to help reduce intake temperatures\u003c\/li\u003e\n\u003cli\u003ePrepreg carbon fiber construction for strength, thermal efficiency, and premium appearance\u003c\/li\u003e\n\u003cli\u003eClear polycarbonate trunk panel to showcase the intake system\u003c\/li\u003e\n\u003cli\u003eImproved throttle response and airflow efficiency\u003c\/li\u003e\n\u003cli\u003eDesigned to support stock and higher-performance builds\u003c\/li\u003e\n\u003cli\u003eMounts using factory airbox mounting locations and hardware; installation requires permanent trimming of the factory trunk carpet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":47874913992860,"sku":"EVE-C8HTC-CF-INT","price":2495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/eventuri-c8-corvette-htc-carbon-intake-white-background.jpg?v=1792261796"},{"product_id":"eventuri-chevrolet-c8-corvette-coupe-black-carbon-intake-system","title":"Eventuri Chevrolet C8 Corvette Coupe Black Carbon Intake System","description":"\u003cp\u003eThe Eventuri Chevrolet C8 Corvette Coupe Black Carbon Intake System is a purpose-built performance upgrade engineered to deliver industry-leading airflow efficiency, measurable dyno gains, and exceptional thermal control for the mid-engine Corvette platform. Developed through extensive CFD analysis and real-world testing, this system produces verified gains of 15-18 wheel horsepower and 15-16 lb-ft of torque while sharpening throttle response across the entire rev range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Information:\u003c\/strong\u003e This Eventuri intake system is designed exclusively for the Chevrolet C8 Corvette Coupe. It is not compatible with the C8 Hard-Top Convertible (HTC). For convertible applications, please see the Eventuri C8 Corvette Convertible Carbon Intake System.\u003c\/p\u003e\n\u003cp\u003ePackaging limitations within the C8’s rear trunk area required a complete ground-up redesign rather than a simple replacement intake. Eventuri reengineered the trunk panel to accommodate a dramatically larger internal airbox volume, now recognized as the largest intake capacity available for the C8 platform. Despite the increased size, OEM trunk functionality is fully retained, allowing owners to benefit from performance gains without sacrificing practicality.\u003c\/p\u003e\n\u003cp\u003eA defining visual feature of the system is the clear polycarbonate trunk panel, which showcases the carbon fiber architecture beneath whenever the trunk is opened. This design transforms the intake into a centerpiece of the engine bay, blending motorsport engineering with show-quality presentation.\u003c\/p\u003e\n\u003cp\u003eAt the core of the system are Eventuri’s patented Venturi filter housings. Unlike conventional cone filter designs, the Venturi geometry promotes laminar airflow by guiding air through a smoother and more controlled path toward the intake tract. This reduces turbulence and drag while increasing overall flow efficiency, creating additional headroom for tuned or higher-output applications.\u003c\/p\u003e\n\u003cp\u003eThe intake operates within a fully sealed configuration that draws air directly from the factory feeds, helping maintain consistently low intake air temperatures. Carbon fiber construction further limits heat transfer compared to traditional materials, supporting denser charge air and repeatable performance under demanding driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe Eventuri intake system combines a revised airflow path with a carbon fiber assembly designed specifically for the C8 Corvette Coupe, providing measurable performance improvements while integrating with the vehicle’s factory mounting locations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProven gains of 15-18 wheel horsepower and 15-16 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eLargest internal intake volume currently available for the C8 platform\u003c\/li\u003e\n\u003cli\u003ePatented Eventuri Venturi filter housings engineered for laminar airflow\u003c\/li\u003e\n\u003cli\u003eFully sealed system utilizing factory air feeds to help reduce intake temperatures\u003c\/li\u003e\n\u003cli\u003ePrepreg carbon fiber construction for strength, thermal efficiency, and premium appearance\u003c\/li\u003e\n\u003cli\u003eClear polycarbonate trunk panel to showcase the intake system\u003c\/li\u003e\n\u003cli\u003eImproved throttle response and airflow efficiency\u003c\/li\u003e\n\u003cli\u003eDesigned to support stock and higher-performance builds\u003c\/li\u003e\n\u003cli\u003eMounts using factory airbox mounting locations and hardware; installation requires permanent trimming of the factory trunk carpet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":47874931458204,"sku":"EVE-C8VT-CF-INT","price":2495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/eventuri-c8-corvette-carbon-intake-white-background.jpg?v=1792261812"},{"product_id":"eventuri-chevrolet-c8-corvette-black-carbon-engine-cover","title":"Eventuri Chevrolet C8 Corvette Black Carbon Engine Cover","description":"\u003cp\u003eThe Eventuri Chevrolet C8 Corvette Black Carbon Engine Cover is a direct replacement for the factory plastic cover, designed to bring the same level of material quality and visual impact as Eventuri’s carbon intake system to the center of the C8’s engine bay. Constructed from pre-preg carbon fiber, this cover transforms the appearance of the mid-mounted LT2 while maintaining OEM mounting points and straightforward installation.\u003c\/p\u003e\n\u003cp\u003eThe C8’s rear glass hatch places the engine on display, making the engine cover a focal point of the entire car. By replacing the stock plastic panel with a high-gloss carbon fiber component, the engine bay gains a more technical, motorsport-inspired aesthetic that matches other premium carbon upgrades.\u003c\/p\u003e\n\u003cp\u003eEach cover is manufactured using the same pre-preg carbon process found in Eventuri’s intake systems, ensuring excellent heat resistance, long-term durability, and a precise fit. A red vinyl stripe is included, echoing the design language of the Eventuri C8 carbon intake for customers who want a cohesive and fully integrated engine bay theme.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the engine cover only. Intake system shown in some images is available separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for the factory C8 Corvette plastic engine cover\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eHigh-gloss UV-resistant clear coat\u003c\/li\u003e\n\u003cli\u003eLightweight and heat-resistant composite design\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting locations for simple installation\u003c\/li\u003e\n\u003cli\u003eIncludes red vinyl stripe to match Eventuri C8 carbon intake system\u003c\/li\u003e\n\u003cli\u003eEnhances engine bay appearance beneath the factory glass hatch\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003cli\u003eSKU: EVE-C8VT-CF-ENG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChevrolet C8 Corvette Stingray\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":47874931622044,"sku":"EVE-C8VT-CF-ENG","price":645.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/52625084631_48dfbcd67c_b.jpg?v=1792261814"},{"product_id":"chevrolet-corvette-c8-carbon-fiber-front-lip","title":"Chevrolet Corvette C8 Carbon Fiber Front Lip","description":"\u003cp\u003eLooking to add the carbon fiber aesthetic to your Corvette C8? This front lip spoiler is just what you need to elevate your C8 to the next level. This front lip makes your C8 look much more aggressive without having to worry about scraping, since this front lip will not lose you any ground clearance. We make this front lip in the same high quality dry carbon fiber fabric in a 2x2 weave as many of the other super car products that we have to offer. Every Corvette C8 front lip is always quality checked in our warehouse in Southern California before they are shipped out all over the world. RW Carbon coats each front lip in a protective clear coat to ensure a long lasting shine and shimmer that will last for the years of use to come on your C8.\u003c\/p\u003e \u003chr\u003e \u003ch1\u003eInstallation\u003c\/h1\u003e \u003cdiv onclick=\"showInstallation()\"\u003e \u003cimg src=\"\/media\/uploads_ckeditor\/icon-arrow.png\"\u003e \u003cp\u003eThis Corvette C8 front lip spoiler is recommended to be done by a professional.. This front spoiler will require the use of self tapping screws but no bumper removal is required.\u003c\/p\u003e \u003chr\u003e \u003ch1\u003eFitment\u003c\/h1\u003e \u003cdiv onclick=\"showFitment()\"\u003e \u003cimg src=\"\/media\/uploads_ckeditor\/icon-arrow.png\"\u003e \u003cul\u003e \u003cli\u003e2020+ Chevrolet Corvette C8\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch1\u003eFeatures\u003c\/h1\u003e \u003cdiv onclick=\"showFeatures()\"\u003e \u003cimg src=\"\/media\/uploads_ckeditor\/icon-arrow.png\"\u003e \u003cul\u003e \u003cli\u003eSuperior fitment and quality guarantee\u003c\/li\u003e \u003cli\u003eGenuine 2x2 full carbon fiber weave pattern\u003c\/li\u003e \u003cli\u003eSport appearance upgrade over the factory front lip\u003c\/li\u003e \u003cli\u003eAdds a lower and meaner look to your C8\u003c\/li\u003e \u003cli\u003eHigh quality clearcoat ensures no fading or discoloration over time\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch1\u003eWhy RW Carbon?\u003c\/h1\u003e \u003cdiv onclick=\"showWhyRWCarbon()\"\u003e \u003cimg src=\"\/media\/uploads_ckeditor\/icon-arrow.png\"\u003e \u003cp\u003eWe know there are many companies out there claiming to have the best carbon fiber upgrades for your Corvette C8. At RW Carbon we are different - We quality control every single item that we ship from our warehouses to provide you with a quality item that is free of defects. By choosing RW Carbon we make the promise to deliver a consistent, quality product that is shipped from our Southern California location, not from China. Additionally, all products shipping from our warehouse are meticulously inspected, and packaged to ensure the utmost care and provide a truly quality piece for your C8. Our products may look similar to other carbon fiber accessories on the market but they are different in the fact they have a clean weave construction and a high quality clearcoat.\u003c\/p\u003e \u003chr\u003e \u003cimg alt=\"Chevrolet Corvette C8 Carbon Fiber Front Lip Spoiler\" src=\"\/media\/uploads_ckeditor\/rw-carbon-chevrolet-corvette-C8-carbon-fiber-lip-1.jpg\"\u003e \u003cimg alt=\"Chevrolet Corvette C8 Carbon Fiber Front Lip Spoiler detail shot\" src=\"\/media\/uploads_ckeditor\/rw-carbon-chevrolet-corvette-C8-carbon-fiber-lip-2.jpg\"\u003e \u003cp style=\"font-size:0.8em;\"\u003e\u003cimg src=\"\/images\/warning.svg\" width=\"16\" alt=\"Prop 65 Warning\"\u003e \u003cb\u003eWARNING:\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"RW Carbon","offers":[{"title":"Default Title","offer_id":47875025305756,"sku":"vettec801","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/vettec801.jpg?v=1792261027"},{"product_id":"katech-zr1-ls9x-ls9r-clutch-alignment-tool","title":"Katech ZR1\/LS9X\/LS9R Clutch Alignment Tool","description":"\u003ch2\u003eKatech ZR1\/LS9X\/LS9R Clutch Alignment Tool\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003e\u003cem\u003eClutch Disc Alignment for Compatible ZR1, LS9X, and LS9R Twin-Disc Clutch Assemblies.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Katech ZR1\/LS9X\/LS9R Clutch Alignment Tool helps position the clutch discs during installation of compatible twin-disc clutch assemblies. Proper alignment supports transmission input shaft installation through both clutch discs.\u003c\/p\u003e \u003chr\u003e \u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDesigned for Compatible ZR1, LS9X, and LS9R Twin-Disc Clutches\u003c\/li\u003e \u003cli\u003eHelps Align Both Clutch Discs During Assembly\u003c\/li\u003e \u003cli\u003eSupports Transmission Installation by Positioning the Clutch Disc Hubs\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eTechnical Specifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Clutch Alignment Tool\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClutch Configuration:\u003c\/strong\u003e Twin-Disc\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApplications:\u003c\/strong\u003e Compatible ZR1, LS9X, and LS9R Clutch Assemblies\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eWhat's Included\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOne Katech ZR1\/LS9X\/LS9R Clutch Alignment Tool\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eFitment \u0026amp; Installation Notes\u003c\/h3\u003e \u003cp\u003eFor use with compatible ZR1, LS9X, and LS9R twin-disc clutch assemblies. Confirm the clutch configuration before ordering; this tool is not presented as a universal fit for all twin-disc clutches.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFollow the Clutch Manufacturer's Assembly Instructions\u003c\/li\u003e \u003cli\u003eVerify Correct Disc Orientation and Alignment Before Tightening the Clutch Assembly\u003c\/li\u003e \u003cli\u003eRemove the Alignment Tool Before Installing the Transmission\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch3\u003eWhy Choose Katech\u003c\/h3\u003e \u003cp\u003eThe Katech ZR1\/LS9X\/LS9R Clutch Alignment Tool provides an application-specific aid for assembling compatible twin-disc clutches, helping simplify disc positioning during installation.\u003c\/p\u003e \u003chr\u003e \u003cp\u003eFor clutch and alignment tool compatibility questions, contact .\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"..\/files\/prop-65-warning.jpg\" alt=\"Prop 65 Warning\"\u003e\u003c\/p\u003e","brand":"Katech","offers":[{"title":"Default Title","offer_id":47875048767644,"sku":"KAT-ST-190","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/M198642223.png?v=1792260744"},{"product_id":"gm-zr1-slave-cylinder","title":"GM ZR1 Slave Cylinder","description":"Used in LS9X\/LS9R kits for C6, 2010 Camaro (with spacer)","brand":"Katech","offers":[{"title":"Default Title","offer_id":47875049783452,"sku":"GMP-19432065","price":342.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/M198642244.jpg?v=1792260747"},{"product_id":"boost-logic-formula-series-titanium-exhaust-for-c8-zr1-corvette","title":"Boost Logic Formula Series Titanium Exhaust For C8 ZR1 Corvette","description":"\u003cp\u003eUnleash the pure adrenaline of a Formula One soundtrack with the Boost Logic Formula Series Exhaust for the C8 Corvette ZR1. Crafted from high-grade titanium, this performance masterpiece is engineered to deliver an exhilarating high-pitch tone that transforms your ZR1 into a symphony of speed.\u003c\/p\u003e\n\u003cp\u003eLightweight and durable, this exhaust system not only amplifies the aggressive character of your ZR1 but also enhances its handling dynamics by reducing unnecessary weight. Precision-tuned for the ultimate driving experience, the Boost Logic Formula Series Exhaust captures the essence of motorsport with every throttle.\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-Grade Titanium Construction: Durable, heat-resistant, and incredibly lightweight.\u003c\/li\u003e\n\u003cli\u003eSignature Formula One Sound: Produces a high-pitched, race-inspired tone that turns heads and stirs emotions.\u003c\/li\u003e\n\u003cli\u003eWeight Savings: Reduces overall vehicle weight for improved performance and handling.\u003c\/li\u003e\n\u003cli\u003eExceptional Craftsmanship: Designed with precision for a perfect fit and stunning appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade your ZR1 to the next level of performance and sound with the Boost Logic Formula Series Titanium Exhaust. Let your Corvette sing like a true racing legend.\u003c\/p\u003e","brand":"Boost Logic","offers":[{"title":"Default Title","offer_id":47875162800284,"sku":"BL 12010601-1","price":4499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/DSC06570-Edit-2.jpg?v=1792261392"},{"product_id":"fabspeed-chevrolet-corvette-c8-zr1-stainless-steel-valved-cat-back-exhaust-system-2025","title":"Fabspeed Chevrolet Corvette C8 ZR1 Stainless Steel Valved Cat-Back Exhaust System (2025+)","description":"\u003cp\u003eThe Fabspeed Stainless Steel Valved Cat-Back Exhaust System is the ULTIMATE exhaust solution for the C8 ZR1. It provides the same high pitched scream 6700rpm rip  that our Supersport X-Pipe exhaust has while also allowing the driver to quiet the exhaust down using the factory exhaust loudness settings. It’s totally plug-and-play with the factory exhaust valve electric actuator modules. Retaining ALL drive modes, and Z-mode abilities. NO FAULT CODES with Fabspeed Valved BECAUSE ONLY Fabspeed uses the WOLRDS VERY BEST EXHAUST VALVES from Helical limited Great Britain versus cheap Chinese garbage valves- like local competitors and all competitors.\u003c\/p\u003e \u003cp\u003eOur design process started with 3D scanning the entire OEM exhaust system using our CREAFORM 700 Handscan so that we could make a complete Solidworks 3D model of the exhaust. We then designed the exhaust and fixtures using that model so that the exhaust fit perfectly to OEM standards. After multiple revisions for sound and dyno testing we decided to use our signature cast X-Pipe to tie the two cylinder banks together for exhaust scavenging and to defeat resonance. The valves are mounted to CNC’d plates that resist heat and keep the electronics working under extreme conditions. The piping is mandrel bent from T304 stainless steel, and we use ultra high temp heat wrapping to keep temps in the engine bay down.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFits all Chevrolet Corvette C8 ZR1 2025+ Models (Except EU Spec Models)\u003c\/li\u003e \u003cli\u003eWeight savings of 20 lbs \/ 9.1 kg vs the factory exhaust\u003c\/li\u003e \u003cli\u003eYour choice of Carbon Fiber tips with new carbon fiber surround trim, TITANIUM QUAD tips blued titanium and or retain your factory quad ZR1 tips\u003c\/li\u003e \u003cli\u003ePlug-and-play Helical UK valves that completely retain the factory exhaust valve functionality- WITH 100% GUARANTEED RELIABILITY . no fault codes like cheap mongrel exhaust valves.\u003c\/li\u003e \u003cli\u003eIncorporates our signature cast X-pipe for superior flow and exhaust scavenging\u003c\/li\u003e \u003cli\u003eLarger diameter tubing allows the ZR1 engine to really breathe\u003c\/li\u003e \u003cli\u003eConstructed from high-quality 14-16ga CNC mandrel-bent stainless steel for optimum flow and maximum durability\u003c\/li\u003e \u003cli\u003e. PIE CUT multiple pieces of titanium or stainless steel is INDICATIVE OF CHEAP SWEAT SHOW CHINESE LABOR and a lousy ALIBABA 100% guaranteed to fail system. Pie Cut AINT Craftsmanship. THINK- mandrel bent 1 piece tubing as much as possible is OBVIOUSLY stronger and flows more and reduced HAZ- look it up in welding heat affected zones.\u003c\/li\u003e \u003cli\u003eLaser scanned and CAD designed for perfect OEM fitment using an Ametek Handyscan 700\u003c\/li\u003e \u003cli\u003eNo Check Engine Light guaranteed\u003c\/li\u003e \u003cli\u003eThis cat-back exhaust is 100% emissions legal worldwide\u003c\/li\u003e \u003cli\u003eSimple DIY bolt-on installation, no cutting or welding required\u003c\/li\u003e \u003cli\u003eAll hardware included\u003c\/li\u003e \u003cli\u003e100% built in house and DYNO developed at Fabspeed Motorsport USA\u003c\/li\u003e \u003cli\u003eAll Fabspeed performance products are backed by the Fabspeed Lifetime Warranty\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSOUND:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThis incredibly versatile exhaust is able to go from tame cruiser, to thoroughbred race car with the press of a button. With the car set to the loud exhaust mode (valves open), you’ll be treated to a much more authoritative rumble at idle, and our signature Ti X-pipe bringing out the a high pitched wail that, dare we say, exceeds that of the Ferrari 458. With the ZR1 set to quite mode (valves closed), it’s totally drone free and you can easily have a conversation in the cabin just like the OEM exhaust.\u003c\/p\u003e Click to experience the Fabspeed sound → \u003caudio width=\"300\" height=\"32\" src=\"https:\/\/store-fh9wsjv2.mybigcommerce.com\/content\/Sound\/ZR1_SportCat-Megaphone.mp3\"\u003e\u003c\/audio\u003e","brand":"Fabspeed Motorsport","offers":[{"title":"Default Title","offer_id":47875188457628,"sku":"FS.CHEVY.C8ZR1.VLV","price":6925.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/DSC00108__60031.1750985887.jpg?v=1792261930"},{"product_id":"c8-corvette-zr1-sport-racing-hjs-german-catalytic-converters","title":"C8 Corvette ZR1 Sport Racing HJS German Catalytic Converters","description":"\u003cp\u003eThe C8 ZR1 is already a 1064HP beast - but stock restrictions choke it's true potential. FABSPEED MOTORSPORT USA's ULTRA High-Flow GERMAN Imported Racing Catalytic converters are 100% PROVEN in GLOBAL MOTORSPORTS WEC\/IMSA competition and engineered to free the fury. Designed with the ultimate catalytic converters rated at 1200HP each, Fabspeed employs (2) 200-cell EMITEC HJS tri-metallic sport cats for the C8 ZR1. The Fabspeed HJS German racing catalytic converters FLOW 90 to 92% of a straight pipe to dramatically reduce backpressure thereby maximizing exhaust flow, turbo spool, twin turbocharged exotic whistling noises and throttle response. Fabspeed HJS Emitec C8ZR1 catalytic converters achieve all these results WHILE being EPA Compliant and European Homologated, Certified and TUV approved. More power than illegal catbypass pipes as well.\u003c\/p\u003e \u003cp\u003e\u003cbr\u003eCrafted from aerospace-grade T304L stainless steel, Fiber Optic Laser and back purged TIG welded for maximum durability, this upgrade delivers a deeper, more aggressive tone while saving significant weight. Saves -20 pounds -9.1KG, while unlocking real horsepower gains. Expect 100% guaranteed quicker turbo spool-up\/spin up transient response, a ferocious growl, and dyno-proven performance increases across the RPM range.\u003cbr\u003e\u003cbr\u003eWhether you're chasing numbers or just want your ZR1 to sound as wild as it looks, this is the upgrade it’s been begging for!\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFits all 2025+ C8 ZR1's (does not fit 2026+ ZR1X's)\u003c\/li\u003e \u003cli\u003eHigh-flow, emissions-compliant and certified maximum possible performance catalysts\u003c\/li\u003e \u003cli\u003eDyno-tested horsepower and torque gains- NO BULL-SHIT. +91 HP and +141 lb-ft TORQUE 120.5 dB\u003c\/li\u003e \u003cli\u003eSignature Fabspeed sound - bold, refined, and unapologetic\u003c\/li\u003e \u003cli\u003e100% CAD designed, CNC machined, and manufactured at our Fort Washington facility, therefore it is 100% Made in the USA!\u003c\/li\u003e \u003cli\u003eBolt-on power. Track-ready tone. No compromises.\u003c\/li\u003e \u003cli\u003eInsulated with 2000 degrees Fahrenheit\/ 1094 degrees Celsius ceramic fiber, wrapped in a 625 Inconel Double Wall Heat Blanket\u003c\/li\u003e \u003cli\u003eMore power than Cat-bypass pipes ZERO need to go cat-less and be illegal.\u003c\/li\u003e \u003cli\u003eFabspeed USA - HJS Germanys 25 year USA North American exclusive imported dealer distributor- genuine HJS - Emitec HJS racing catalytic converters.\u003c\/li\u003e \u003cli\u003eWe use German-made HJS HD tri-metallic 200-cell EURO 6 homologated catalytic converters for the best performance and reliability\u003c\/li\u003e \u003cli\u003eNO catalyst generated check engine light (CEL) Guaranteed\u003c\/li\u003e \u003cli\u003eNo ECU tune required\u003c\/li\u003e \u003cli\u003eSimple bolt-on installation, no cutting or welding required\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003eNot cross-compatible with ZR1X\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003eAll Fabspeed performance products are backed by the Fabspeed Lifetime Warranty\u003c\/li\u003e \u003c\/ul\u003e","brand":"Fabspeed Motorsport","offers":[{"title":"Default Title","offer_id":47875188719772,"sku":"FS.CHEVY.C8ZR1.SC","price":7145.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/DSC03005__85898.1769048945.jpg?v=1792261934"},{"product_id":"fabspeed-chevrolet-corvette-c8-zr1-stainless-steel-megaphone-cat-back-exhaust-system-2025","title":"Fabspeed Chevrolet Corvette C8 ZR1 Stainless Steel Megaphone Cat-Back Exhaust System (2025+)","description":"\u003cp\u003eFabspeed's Stainless Megaphone Exhaust is the ultimate street legal, track focused styled lightweight cat-back setup for your Corvette C8 ZR1. This exhaust system will wake up your LT7 engine like no other cat-back exhaust out there.\u003c\/p\u003e \u003cp\u003eThis all out race exhaust turns the ZR1’s 5.5l V8 Twin 76mm Turbo exhaust note into a thoroughbred race sound. With a much more authoritative rumble at idle, and a higher pitched wail through the RPM range, this systems wakes up the quiet OEM sounds of the new ZR1.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePOWER:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eHP: +44\u003c\/p\u003e \u003cp\u003eTQ: +68\u003c\/p\u003e \u003cp\u003eDB: 122.8\u003c\/p\u003e \u003cp\u003eDB + Sport Cat: 127.7\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFits all Chevrolet Corvette C8 ZR1 2025+ Models Coupes and Convertibles. Likely European ROW models too. INQUIRE.\u003c\/li\u003e \u003cli\u003e3\"(76mm) FREE FLOW CNC mandrel bent T304\/ T321 exhaust expands to 5\"(127mm) and then reduces back to 3.5\"(90mm) to the tip outlet.\u003c\/li\u003e \u003cli\u003eMEGAPHONE STEPPED DESIGN - unique and extracts more exhaust helping reduce backpressure.\u003c\/li\u003e \u003cli\u003eSaves 39 lbs \/ 17.69 kg compared to the stock\/OEM muffler\u003c\/li\u003e \u003cli\u003eInsulated with 2000 degrees Fahrenheit\/ 1094 degrees Celsius ceramic fiber, wrapped in 625 stainless steel\u003c\/li\u003e \u003cli\u003eRetains the C8  ZR1 QUAD factory OEM “floating” exhaust tips, or convert to FABSPEED QUAD Carbon Fiber or QUAD Titanium tips with a Carbon Fiber surround\u003c\/li\u003e \u003cli\u003eConstructed from mandrel bent T304 Stainless Steel and 321 stainless steel flexible bellow.\u003c\/li\u003e \u003cli\u003e100% MADE in USA at FABSPEED from the Worlds VERY BEST COMPONENTS.\u003c\/li\u003e \u003cli\u003eComes with Fabspeed electronic valve simulators that prevent a CEL\u003c\/li\u003e \u003cli\u003eThis cat-back system is emissions legal in all 50 states and the rest of the world (ROW)\u003c\/li\u003e \u003cli\u003eNo Check Engine Light guaranteed\u003c\/li\u003e \u003cli\u003e100% complies with factory GM Corvette warranty and worldwide emissions regulations.\u003c\/li\u003e \u003cli\u003eSimple bolt-on installation, no cutting or welding required\u003c\/li\u003e \u003cli\u003eAll Fabspeed performance products are backed by the Fabspeed Lifetime Warranty\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eSOUND:\u003c\/strong\u003e\u003c\/p\u003e Click to experience the Fabspeed sound → \u003caudio width=\"300\" height=\"32\" src=\"https:\/\/store-fh9wsjv2.mybigcommerce.com\/content\/Sound\/ZR1_SportCat-Megaphone.mp3\"\u003e\u003c\/audio\u003e","brand":"Fabspeed Motorsport","offers":[{"title":"Default Title","offer_id":47875188818076,"sku":"FS.CHEVY.C8ZR1.SSM","price":5935.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/DSC00685__09374.1754062249.jpg?v=1792261935"},{"product_id":"c8-corvette-zr1-5ply-silicone-induction-hoses","title":"C8 Corvette ZR1 5ply Silicone Induction Hoses","description":"\u003cp\u003eC8ZR1 5 ply silicone BOOST hoses. Military grade aerospace quality 5 ply silicone reinforced boost hoses for the C8 ZR1 1064 Hypercar.\u003c\/p\u003e \u003cp\u003eDirect replacement hoses for the cheap black single ply rubber factory OEM hoses. Holds alot more boost and looks tremendous as the blue matches the ZR1 intake BLUE DEVIL SIGNATURE INTAKE PLENUM . Amazing visual upgrade and silicone hoses don't expand or contract under boost transient loads. Simple DIY, Do-it-yourself, upgrade reusing the factory GM Corvette C8ZR1 stainless steel hose clamps.\u003c\/p\u003e","brand":"Fabspeed Motorsport","offers":[{"title":"Default Title","offer_id":47875188981916,"sku":"FS.CHEVY.C8ZR1.BSBH","price":544.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/DSC02063_Edit_Blue__12162.1764740946.jpg?v=1792261935"},{"product_id":"fabspeed-chevrolet-corvette-c8-zr1-titanium-quad-tips-2025","title":"Fabspeed Chevrolet Corvette C8 ZR1 Titanium Quad Tips (2025+)","description":"\u003cp\u003eChevrolet doesn’t offer a Titanium exhaust tip option, so we set out to fix that.\u003c\/p\u003e \u003cp\u003eOur tips are designed to fit the stock rear bumper and will work with most aftermarket exhaust systems that use the factory exhaust tips. Made from Titanium, and slightly blued, these tips are designed to stand up to the abuse any street or tracked ZR1 can throw at them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFits all Chevrolet Corvette C8 ZR1 2025+ models with center exit exhaust\u003c\/li\u003e \u003cli\u003eDirect replacement bolt-on tips to replace the factory Chevy tips\u003c\/li\u003e \u003cli\u003eFloating style tips work with OEM and many different aftermarket exhausts\u003c\/li\u003e \u003cli\u003eCrafted from Titanium, and built to last\u003c\/li\u003e \u003cli\u003eBeautiful Blue-Purple tint under intense heat\u003c\/li\u003e \u003cli\u003eBolt-on installation, no cutting or welding required\u003c\/li\u003e \u003cli\u003eAll Fabspeed performance products are backed by the Fabspeed Lifetime Warranty\u003c\/li\u003e \u003c\/ul\u003e","brand":"Fabspeed Motorsport","offers":[{"title":"Default Title","offer_id":47875193995420,"sku":"FS.CHEVY.C8ZR1.QTTI","price":1645.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/Tips__90912.1757128458_7af04924-0ddd-4d9f-a86d-fccd0ae523ca.jpg?v=1792261940"},{"product_id":"fabspeed-chevrolet-corvette-c8-zr1-carbon-fiber-quad-tips-2025","title":"Fabspeed Chevrolet Corvette C8 ZR1 Carbon Fiber Quad Tips (2025+)","description":"\u003cp\u003eChevrolet doesn’t offer a carbon fiber exhaust tip option, so we set out to fix that.\u003c\/p\u003e \u003cp\u003eOur tips are designed to fit the stock rear bumper and will work with most aftermarket exhaust systems that use the factory exhaust tips. Made from T304 stainless steel and real matte carbon fiber these tips are designed to stand up to the abuse any tracked ZR1 can throw at them.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eFits all Chevrolet Corvette C8 ZR1 2025+ models with center exit exhaust\u003c\/li\u003e \u003cli\u003eDirect replacement bolt-on tips to replace the factory Chevy tips\u003c\/li\u003e \u003cli\u003eFloating style tips work with OEM and many different aftermarket exhausts\u003c\/li\u003e \u003cli\u003eCrafted from T304 stainless steel and real Matte Carbon fiber\u003c\/li\u003e \u003cli\u003eMatte carbon fiber tips are \"intercooled\" so they last under intense heat\u003c\/li\u003e \u003cli\u003eBolt-on installation, no cutting or welding required\u003c\/li\u003e \u003cli\u003eAll Fabspeed performance products are backed by the Fabspeed Lifetime Warranty\u003c\/li\u003e \u003c\/ul\u003e","brand":"Fabspeed Motorsport","offers":[{"title":"Default Title","offer_id":47875194093724,"sku":"FS.CHEVY.C8ZR1.QTCF","price":1645.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/C8_Z06_Carbon_Fiber_Tips_Studio_8__81924.1757128468.jpg?v=1792261941"},{"product_id":"fabspeed-chevrolet-c8-corvette-zr1-high-flow-carbon-fiber-intake-pipes-2025","title":"Fabspeed Chevrolet C8 Corvette ZR1 high-flow Carbon Fiber Intake Pipes 2025+","description":"\u003cp\u003eFABSPEED MOTORSPORT Left and Right Racing style Ultra High-Flow Carbon Fiber Intake Pipes for the 2025+ Corvette C8 ZR1. Maximum air-flow of Cold Dense air to your ZR1 Twin Turbocharged engine with enhanced engine bay appearance.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eThe factory intake tubes are ABS plastic and SQUISHED in several areas for clearance that actually reduce intake airflow. Factory GM Left and Right intake tubes are therefore compromised for maximum airflow CFM.\u003c\/li\u003e \u003cli\u003eFabspeed 3D laser scanned and CAD developed Ultra High Flow intake tubes that fit any and all ZR1 engines and ZR1 X engines\u003c\/li\u003e \u003cli\u003eMaximized ULTRA HIGH Flow bolt-on intake tubes for seriously more simple do-it-yourself intake flow and sportscar sound\u003c\/li\u003e \u003cli\u003eCarbon fiber pipes Left and Right side drastically improve performance and APPEARANCE on all ZR1 and ZR1X cars\u003c\/li\u003e \u003cli\u003eNO effect on Factory GM Warranty or worldwide emissions under any circumstances\u003c\/li\u003e \u003cli\u003eDirect simple DIY, do it yourself installation, performance Left and Right ZR1\/X intake tubes parts from Fabspeed 30+ years of Exotic Car Performance\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIDEALLY paired with our Signature HIGH-FLOW 5 ply Blue-Devil style - Blue Silicone Induction Hoses for a complete engine bay dress-up found here!\u003c\/p\u003e","brand":"Fabspeed Motorsport","offers":[{"title":"Default Title","offer_id":47875195535516,"sku":"FS.CHEVY.C8ZR1.INTPCF","price":795.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/Intake_Hoses_Carb__97483.1775054271.jpg?v=1792261947"},{"product_id":"fabspeed-corvette-c8-zr1-high-flow-competition-air-intake-system","title":"Fabspeed Corvette C8 ZR1 High-Flow Competition Air Intake System","description":"\u003ch2\u003eFabspeed Motorsport Carbon Fiber Performance Intake System for the Corvette C8 ZR1 \u0026amp; ZR1X\u003c\/h2\u003e \u003cp\u003eEngineered from the ground up using advanced CAD design and CFD (Computational Fluid Dynamics) analysis, the Fabspeed Motorsport Carbon Fiber Performance Intake System is designed to maximize airflow and unlock the full potential of the Corvette C8 ZR1 and ZR1X.\u003c\/p\u003e \u003cp\u003eUnlike the factory intake system, which shares much of its design philosophy with the C8 Z06 platform, the Fabspeed intake has been purpose-built to meet the airflow demands of the ZR1's high-output powerplant. By significantly reducing intake restriction, it delivers an increased volume of cool, dense air directly to the engine for improved performance and throttle response.\u003c\/p\u003e \u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eEngineered for Maximum Airflow\u003c\/strong\u003e - Advanced CAD engineering and CFD flow optimization deliver significantly improved airflow compared to the factory intake system.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHigh-Capacity Dual 6-Inch Air Filters\u003c\/strong\u003e - Massive 150 mm dual cone air filters with integrated velocity stacks maximize airflow while providing exceptional filtration and intake efficiency.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePremium Carbon Fiber Construction\u003c\/strong\u003e - Lightweight, high-quality carbon fiber airbox is designed to maintain low intake temperatures while minimizing heat transfer from the engine bay.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClear Lexan Inspection Cover\u003c\/strong\u003e - Precision-machined transparent Lexan lid showcases the intake system and allows enthusiasts to view the race-inspired internal design without removing the cover.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCold Air Optimization\u003c\/strong\u003e - Designed to channel the greatest possible volume of cool ambient air directly into the engine for consistent, repeatable performance.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eBolt-On Installation\u003c\/strong\u003e - Direct replacement for the factory intake system.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEasy Filter Access\u003c\/strong\u003e - The removable Lexan inspection cover provides quick access to both high-flow air filters, making routine cleaning, maintenance, or replacement fast and hassle-free.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eEmissions \u0026amp; Warranty Friendly\u003c\/strong\u003e - Designed to maintain compliance with factory emissions equipment and intended for use without affecting factory warranty coverage, subject to applicable laws and manufacturer policies.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFor more than \u003cstrong\u003e31 years\u003c\/strong\u003e, Fabspeed Motorsport has engineered, manufactured, and tested premium performance products for the world's finest exotic and sports cars. Every intake system reflects our commitment to precision engineering, uncompromising quality, and measurable performance.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eInnovation. Not Imitation. That's the Fabspeed Difference.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Fabspeed Motorsport","offers":[{"title":"Coupe","offer_id":47875199467676,"sku":"FS.CHEVY.C8ZR1.VT.CAI","price":2995.95,"currency_code":"USD","in_stock":true},{"title":"HTC","offer_id":47875199500444,"sku":"FS.CHEVY.C8ZR1.HTC.CAI","price":2995.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/DSC03923_v2__59197.1784793252.jpg?v=1792261949"},{"product_id":"cpr-c8-front-frunk-ice-tank","title":"CPR C8 Front (Frunk) ice tank","description":"\u003cp\u003eAs this platform continues to get faster and faster we have developed a front ice tank to meet the demands of those that want the absolute coldest intake air temps possible. This tank can be used for any of the power adder options out there on the market. We provide everything to get you to the engine bay and back, the exact connections to your intercooler setup will be up to you as there are so many setups out there on the market.\u003c\/p\u003e\n\u003cp\u003eThe tank features a CWA400 pump that is hidden under the top you see, it allows us to provide you with the cleanest setup possible we feel and provide great flow and ample capacity for the system. Our tank is constructed in a way that you can easily still put stuff on it if you wish without fear. The kit includes everything shown in the photo plus the lines to run to the engine and back, for that line we provide vibrant silicone line as it will conform to the complex bends easier needed to make the run.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote: This will not fit an Eray due to the battery being in the tunnel. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Cordes Performance Racing","offers":[{"title":"Default Title","offer_id":47875275030684,"sku":"cpr-c8-front-frunk-ice-tank","price":2499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/1000031676-scaled.jpg?v=1792262436"},{"product_id":"cpr-c8-procharger-maf-bypass-pipe","title":"CPR C8 Procharger Maf\/bypass pipe","description":"\u003cp\u003eThe out of the box Procharger kit is fantastic, but when you wish to turn up the power tuning can be a bit tricky on them. That is why we made this product to aid in tuning and providing a blow off valve to keep the supercharger happy. The maf gets relocated from the air inlet tube, to the charge tube so tuning becomes much easier on these. We include also a Turbosmart bypass valve (BOV) to vent excess pressure under normal driving conditions, along with when you release the throttle to prevent surging on the supercharger.\u003c\/p\u003e \u003cp\u003eThe kit includes all the required couplers, clamps, bov, maf flange, etc to directly bolt onto your current setup.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTuning is required if you are switching over to this. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Cordes Performance Racing","offers":[{"title":"Default Title","offer_id":47875280470172,"sku":"cpr-c8-procharger-maf-bypass-pipe","price":1184.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/1000011824-scaled.jpg?v=1792262438"},{"product_id":"eventuri-air-filter-cleaning-kit","title":"Eventuri Air Filter Cleaning Kit","description":"\u003cp\u003eThe Eventuri Air Filter Cleaning Kit is a dedicated maintenance solution engineered specifically for Eventuri air filters. Developed to support Eventuri's patented reverse-mounted filter architecture, this kit helps maintain consistent airflow, filtration efficiency, and long-term durability while preserving the performance characteristics engineered into every Eventuri intake system.\u003c\/p\u003e \u003cp\u003eEventuri air filters utilize advanced non-woven filtration media tested to ISO 5011 standards, providing OEM-level filtration performance while supporting increased airflow. The cleaning solution is formulated to safely remove dirt, dust, and embedded contaminants without damaging the specialized filter media, restoring airflow and extending filter service life.\u003c\/p\u003e \u003cp\u003eFor Eventuri intake systems equipped with oiled filters, the kit also includes a precision-formulated filter oil designed to restore proper filtration performance after cleaning. When applied correctly, the lightweight oil evenly coats the filter media without excessive saturation, helping maintain optimal airflow while remaining safe for sensitive MAF sensors.\u003c\/p\u003e \u003cp\u003eRoutine maintenance is recommended approximately every 3,500 miles (5,600 km), depending on driving conditions. Before cleaning, loose debris should be removed using light agitation or a soft-bristle brush. If compressed air is used, avoid directing high-pressure air at close range to prevent damage to the filter media.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eDesigned specifically for Eventuri air filters\u003c\/li\u003e\n\u003cli\u003eMaintains airflow and filtration efficiency\u003c\/li\u003e\n\u003cli\u003eSupports Eventuri's patented reverse-mounted filter design\u003c\/li\u003e\n\u003cli\u003eSafe for Eventuri non-woven filtration media\u003c\/li\u003e\n\u003cli\u003eCleaning solution removes embedded contaminants without damaging filter fibers\u003c\/li\u003e\n\u003cli\u003eIncludes precision-formulated filter oil for applicable oiled Eventuri filters\u003c\/li\u003e\n\u003cli\u003eHelps maintain ISO 5011 OEM-level filtration performance\u003c\/li\u003e\n\u003cli\u003eRecommended maintenance interval: approximately every 3,500 miles (5,600 km)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eEventuri Carbon Intake System Replacement Filter - Type B\u003c\/li\u003e\n\u003cli\u003eEventuri Small Replacement Air Filter\u003c\/li\u003e\n\u003cli\u003eEventuri Carbon Intake System Replacement Filter - Type D2\u003c\/li\u003e\n\u003cli\u003eEventuri Carbon Intake System Replacement Filter - Type D\u003c\/li\u003e\n\u003cli\u003eEventuri Carbon Intake System Replacement Filter - Type L\u003c\/li\u003e\n\u003cli\u003eEventuri BMW E9X M3 Replacement Air Filter\u003c\/li\u003e\n\u003cli\u003eEventuri Carbon Intake System Replacement Filter - RSQ8\u003c\/li\u003e\n\u003cli\u003eEventuri Mercedes-AMG C63 \/ GLC63 Replacement Filter Set\u003c\/li\u003e\n\u003cli\u003eEventuri BMW E39 M5 \/ Z8 S62 Panel Filter Set\u003c\/li\u003e\n\u003cli\u003eEventuri Mercedes-AMG G63 Replacement Filter Set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":47875304325276,"sku":"EVE-FLC","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/eventuri-air-filter-cleaning-kit-white-background.jpg?v=1792262071"},{"product_id":"eventuri-carbon-intake-system-replacement-filter-type-b","title":"Eventuri Carbon Intake System Replacement Filter - Type B","description":"\u003cp\u003eThe Eventuri Carbon Intake System Replacement Filter - Type B is engineered to restore the airflow, filtration efficiency, and performance of compatible Eventuri intake systems. Designed specifically for Eventuri's patented reverse-mounted filter architecture, this genuine replacement filter maintains the airflow characteristics and filtration performance originally engineered into the intake system.\u003c\/p\u003e\n\u003cp\u003eConstructed using a dry double-layer non-woven filtration media, the Type B filter meets ISO 5011 filtration standards while remaining completely safe for mass airflow (MAF) sensors. Unlike oiled filters, the dry design requires no maintenance oil, eliminating the possibility of sensor contamination while providing consistent airflow throughout its service life.\u003c\/p\u003e\n\u003cp\u003eA defining feature of the Type B filter is its dual-cone architecture. The internal cone distributes incoming air evenly across the entire filtration surface, while the precision-machined external cone guides airflow toward the center of the intake. Together, these features promote smooth airflow, reduce turbulence, and maximize the effectiveness of Eventuri's patented Venturi housing design.\u003c\/p\u003e\n\u003cp\u003eWhether replacing a filter during scheduled maintenance or keeping a spare available between service intervals, the Eventuri Type B Replacement Filter ensures your intake system continues to perform exactly as intended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Eventuri replacement air filter\u003c\/li\u003e\n\u003cli\u003eDry double-layer non-woven filtration media\u003c\/li\u003e\n\u003cli\u003eMeets ISO 5011 filtration standards\u003c\/li\u003e\n\u003cli\u003eSafe for MAF sensors - no oil required\u003c\/li\u003e\n\u003cli\u003eDual-cone design for optimized airflow distribution\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for compatible Eventuri intake systems\u003c\/li\u003e\n\u003cli\u003eIncludes one replacement filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEventuri Air Filter Cleaning Kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eventuri","offers":[{"title":"Default Title","offer_id":47875328082076,"sku":"EVE-661-G2-FTR","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0473\/3206\/5436\/files\/eventuri-replacement-air-filter-type-b-white-background.jpg?v=1792262089"}],"url":"https:\/\/daroracing.com\/collections\/2027-chevrolet-corvette-zr1.oembed","provider":"Daro Racing","version":"1.0","type":"link"}